Wholesale Best Water Nozzle Products,Water Nozzle Suppliers,manufacturers

Categories

Contact Us

86-0595-86801910 ivy.xiao7 info@winnerfirehose.com

Hot products

water-nozzle

View :

Grid View List View

Ductile Iron Water Seal Thread Gate Valve PN16
Ductile Iron Water Seal Thread Gate Valve PN16 A gate valve, also known as a sluice valve, is a valve that opens by lifting a barrier (gate) out of the path of the fluid. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid when the gate is fully opened. The gate faces can be parallel but are most commonly wedge-shaped (in order to be able to apply pressure on the sealing surface). Gate valves are used to shut off the flow of liquids rather than for flow regulation. When fully open, the typical gate valve has no obstruction in the flow path, resulting in very low flow resistance. Gate Valve Applications Gate valves are used in almost all fluid services such as air, fuel gas, feedwater, steam, lube oil, hydrocarbon, and all most any services. Some special gate valve is used in slurry and powder product also such as knife gate valve Advantages of Gate Valve Gate valve provides good pressure drop during operation Most of the gate valve can be used as bi-directional They are suitable for high pressure and temperature application and required less maintenance

Related Tags :
Water Seal Thread Gate Valve Thread Gate Valve PN16 Ductile Iron Gate Valve
read more
Water Pressure Release Valve for Fire Fighting
Water Pressure Release Valve for Fire Fighting The valve consists of the main valve and outside installed control pilot valve, mainly installed in the bypass of the protected water supply system in the building, guarantee the pressure of the main valve upstream water supply zone, when the pressure in the water supply pipe exceeds the pressure set by the pressure releasing valve, the pressure releasing valve is switched on to prevent pipeline and equipment from damage by pressure exceeding. This valve is mainly used in pressure releasing of the fire test circulation system in high-rise buildings, is the upgrade replacement product of the spring safety valve. Features: 1)Reasonable and novel structure, reasonable use of the hydraulic principle to control. 2)Long service life. 3)Valve clack quick opening and slow closure, no water hammer impacting. 4)High sensitivity, safe pressure discharge. 5)Stable operation, no noise.

Related Tags :
Pressure Release Valve Water Pressure Release Valve Pressure Release Valve for Fire Fighting
read more
Water Pressure Relief Valve for Fire Fighting
Water Pressure Relief Valve for Fire Fighting This valve is used for the high building fore-fighting system,To prevent the pipeline and equipment damage due to overpressure. The body uses full passage streamline design, of a small fluid resistance and a heavy flow. This valve can be used as either a pressure releasing or holding valve. when used as the former, it can release the pressure surpassing the safe value set with the pilot valve and keep the pressure inside of the pipeline below the safe value to prevent system against danger due to an excessively high water pressure;while used as the latter,it can keep the upstream water supply pressure of the main valve over some set value,this is because water supply to the downstream can not be done,unless the upstream is higher than the set value,in order to make sure of he upstream water supply pressure of the main valve.

Related Tags :
Pressure Relief Valve Water Pressure Relief Valve Pressure Relief Valve for Fire Fighting
read more
Ductile Iron Groove Type Signal 6 Inch Water Gate Valve
Ductile Iron Groove Type Signal 6 Inch Water Gate Valve The signal gate valve is mainly used in the pipeline of the fire water system as a function of opening and intercepting the fluid in the pipeline, and converting the opening and closing working state into an electric signal through the signal device. The elastic seat sealing gate valve signal gate valve encapsulating the whole valve disc to generate a deformation compensation effect to achieve a good sealing effect, overcome the general gate valve sealing failure, water leakage, and rust phenomenon, more effective saving installation space. It's mainly composed by the signal device, valve body, valve cover, disc assembly, stem, stem nut, hand wheel and other components. The annunciator is mainly composed of a transmission gear, a transmission rod and a micro switch. Gate Valve Applications Gate valves are used in almost all fluid services such as air, fuel gas, feedwater, steam, lube oil, hydrocarbon, and all most any services. Some special gate valve is used in slurry and powder product also such as knife gate valve Advantages of Gate Valve Gate valve provides good pressure drop during operation Most of the gate valve can be used as bi-directional They are suitable for high pressure and temperature application and required less maintenance

Related Tags :
Water Gate Valve 6 Inch Water Gate Valve Groove Type Gate Valve
read more
High Velocity Water Spray Nozzle For Fire Fighting

Related Tags :
High Velocity Water Spray Nozzle Water Spray Nozzle Water Spray Nozzle For Fire Fighting Spray Nozzle For Fire Fighting
read more
MV Type Fire Sprinkler Medium Velocity Spray Nozzles

Related Tags :
Medium Velocity Spray Nozzles MV Type Fire Sprinkler
read more
Water Curtain Fire Fighting Nozzle

Related Tags :
Water Curtain Fire Fighting Nozzle Water Curtain Nozzle Fire Fighting Nozzle
read more
Aluminum Alloy Fixed Manual Fire Water Monitor
Aluminum Alloy Fixed Manual Fire Water Monitor 1.Product Introduction Manual Fire Monitor has characteristics with adjustable flow rate, distant range, and wide discharging range and the discharge range is also adjustable-----have both straight stream and fog stream. Manual fire monitors can be installed in places of flammable or explosive chemical circumstances, airports, oil areas, oil transport wharves, shipyards, etc. It is an efficient equipment for putting out fire, and it is can also be fixed on fire vehicles. 2.Product Parameter Model PS20 PS30 PS40 PS50 PS60 Flow Rate (Liter/Second) 20 30 40 50 60 Working Pressure(Mpa) 0.8 0.8 0.8 0.8 0.9 Max Working Pressure(Mpa) 1.0 1.0 1.0 1.0 1.2 Flange Connection(mm) DN80 DN80 DN80 DN80 DN100 Water Jetting Range(m) ≥50 ≥60 ≥65 ≥70 ≥75 Horizontal Angle (Degree) 0-360 0-360 0-360 0-360 0-360 Max Angle Of Elevation (Degree) 85 85 85 85 85 Max Angle Of Depression (Degree) -60 -60 -60 -60 -60

Related Tags :
Fire Monitor Manual Fire Monitor Fixed Fire Water Monitor Water Monitor Aluminum Alloy Fire Monitor
read more
Fixed Manual Fire Water Cannon
Fixed Manual Fire Water Cannon This fire water cannon is the latest self-designed technology at home and abroad. The key parts have been improved. It is simple, novel, stable and reliable, flexible in operation and convenient in maintenance. When spraying water column, it can extinguish solid fire; when spraying water mist, it can be used for cooling of fire field, fire rescue, and can also be used for cooling of storage tanks such as oil storage tank area, benzene tank area and methanol tank area. It can effectively absorb the heat in the air at the fire site and absorb the toxic and harmful gases such as smoke and chlorine in the diluted air, which improves the safety factor of firefighters. Applicable to areas of offshore oil rigs, ports, dock oil depots, marine firefighting vessels and other fire extinguishing media. Products Features 1, simple operation, flexible, long range 2, with flow adjustment function 3, horizontal rotation, pitch rotation 4, with straight stream and spary function Product Parameter Model Flow(L/s) Range(m) Working Pressure(MPa) Max Elevation Angle(°) Max Depression Angel(°) Horizontal Rotation Ange(°) Flange PS30 30 ≥55 0.8-1.0 60 -40 0-360 Dn80 PS40 40 ≥60 PS50 50 ≥65

Related Tags :
Fire Water Cannon Manual Fire Water Cannon Fixed Fire Water Cannon
read more
Forged Y Siamese Water Divider Straight Fire Department Connection
Forged Y Siamese Water Divider Straight Fire Department Connection Fire department connection is one of the most important and convenient allies for firefighters on-site. Because of this, there are several requirements in place to guarantee its accessibility. One of them has to do with the distance between a building’s fire hydrant and its Siamese connection. The two Siamese couplings connect servicing hoses that pump water from fire engines. • Single clapper / double clapper designs • Technical: Forged • 2 1/2” swivels ring are pin lug design for ease of use and compatibility with local fire service districts. • Including 2 plug of U.S.A. 2.5" NST polished with chain and plate for fire department. Code No. Inlet size Outlet size WF - FDC01 F 4”BSP 2xF2.5”NST WF - FDC01A F 4”NPT 2xF2.5”NST

Related Tags :
Fire Department Connection Straight Fire Department Connection Siamese Water Divider
read more
FDC 90 Brass Water Divider Fire Department Connection
FDC 90 Brass Water Divider Fire Department Connection Fire department connection is one of the most important and convenient allies for firefighters on-site. Because of this, there are several requirements in place to guarantee its accessibility. One of them has to do with the distance between a building’s fire hydrant and its Siamese connection. The two Siamese couplings connect servicing hoses that pump water from fire engines. • Single clapper / double clapper designs • Technical: Forged • 2 1/2” swivels ring are pin lug design for ease of use and compatibility with local fire service districts. • Including 2 plug of U.S.A. 2.5" NST polished with chain and plate for fire department. Code No. Inlet size Outlet size WF - FDC02 F 4”BSP 2xF2.5”NST WF - FDC02A F 4”NPT 2xF2.5”NST

Related Tags :
FDC 90 Brass Water Divider
read more
DN45 Siamese Fork Fire Fighting Aluminum Water Divider
DN45 Siamese Fork Fire Fighting Aluminum Water Divider Water divider is used for dividing water from one way to two way. Each hose line can be shut-off individually by means of a stop valve. Divider is a popular product in the fire protection and water delivery market. Inlet and outlet with adaptors can be connected with hoses coupled with different coupling. • Inlet & Outlet adaptors: Barcelona, Storz, BS instantaneous, French, Machino, Russian upon request. • Size: 2.5”x1.5”x1.5”,2.5”x2.5”x2.5” • Working Pressure:16bar • Red paint finished outside Code No. Inlet size Outlet size WF-WD15 2.5” 2x1.5” WF-WD25 2.5” 2X2.5”

Related Tags :
Water Divider Aluminum Water Divider DN45 Water Divider
read more
2 inch 52mm Plastic Straight Fire Nozzle
2 inch 52mm Plastic Straight Fire Nozzle 1.Product Introduction Straight fire nozzle,its inlet connection is 2” storz and outlet is straight stream nozzle.Material of construction is aluminum alloy and plastic. 2.Product Parameter Material Aluminum & Plastic Size 25mm / 50mm / 65mm Working pressure 8 Bar Discharge pattern Solid uniform Jet Pattern 3.Products Features Its operating pressure is 116 PSI Max and is naturally polished,It is a basic fire fighting nozzle commonly used by most fire Brigades.These smooth bore tips creates concentrated jet pattern of water flow with maximun reach.

Related Tags :
Straight Fire Nozzle Plastic Straight Fire Nozzle 2 inch Fire Nozzle
read more
Stainless Steel Electric Remote Control Fire Water Monitor For Fire Fighting
Stainless Steel Electric Remote Control Fire Water Monitor For Fire Fighting The remote control fire monitor was designed as compact and reliable device. Horizontal and vertical positioning is accomplished by remotely controlled electric motors, equipped with insulated handles to facilitate safe manual override. The Fog/Jet nozzle can be adjusted between full jet and spray modes by a separate electric motor. Products Features 1) SS304 Stainless Steel construction; 2) Constant or Selectable nozzle ; 3) Vertical swing range: -90° to +90° ; 4) Horizontal rotation :360° ; 5) Electric control jetting Pattern: Straight stream,Fog; 6) Electric driver and control unit box are waterproof; 7) Power supply 12V/24V DC(optional),or 100-230 V AC Parameters: Model Number PSKDS 5 PSKDS 10 Flow Rate 5LPS / 300 LPM / 80GPM 10LPS/ 600 LPM / 160 GPM Working Pressure 8 Bar Max Reach 40 m 45 m Max Fog Angle 120° Max Range of Motion 360°horizontal rotation,-55°/+90°vertical elevate (adjustable) Turning Speed 24°/second rotation, 10°/second vertical Power Supply DC 24V Power Consumption 24V @ 7.5A Waterway Size 2"(50mm) 2"(50mm) Monitor Outlet 2"(50mm) Monitor Inlet Flange 2.5" ANSI 150# is standard,other size and standard available Material Monitor - SS304 stainless steel (SS316 upon request) Nozzle - Hard coated anodized aluminium alloy

Related Tags :
Electric Monitor Fire Water Monitor Remote Control Fire Monitor
read more
Remote Control Fire Fighting Water Cannon For Fire Vehicle
Remote Control Fire Fighting Water Cannon For Fire Vehicle The remote control water cannon was designed as compact and reliable device. Horizontal and vertical positioning is accomplished by remotely controlled electric motors, equipped with insulated handles to facilitate safe manual override. The Fog/Jet nozzle can be adjusted between full jet and spray modes by a separate electric motor. Products Features ● SS304 stainless steel construction. ● Automatic Nozzle supply a stable flow at different flow rate. ● Available controlled both byJoystick at site and RC transmitter wireless. ● Waterproof control system with locking connectors. ● Rotation range 360° ● Elevation range +90°, - 55° ● Power supply 12V/24V DC(optional),or 100-230 V AC Parameters: Model PSKD20-40 Flow Range 20-30-40LPS / 1200-1800-2400 LPM / 320GPM-630GPM, Selectable Working Pressure 6 bar~ 8 bar Max Reach @ Max Flow 60 meters Range of motion -90°~+90° Vert,360° Rotation Max fog angle 120° Turning speed 18 degrees/sec Material (body) 304L Stainless Steel(Standard) 316L Stainless Steel (optional) Material (Gear) Hardcoated anodizing aluminum Material (nozzle) Hardcoated anodizing aluminum Power supply DC 24V(Standard) DC 12V(Optional) AC100-230V (Optional) Power Consumption normal/Max 50W/150W Weight incl. nozzle appox 20kg Cable Length Monitor- CPU 5m Cable Length Joystick-CPU 5m standard/ other length available Pump requirement for minimum performance 40L/S@ 6 bar Pipe dimensions for installation 2-2.5 Inch Monitor Inlet 3” or 4" flange Monitor Outlet 2.5 inch NH Water way size 2.5 inch PACKAGE ● SS Monitor..............................1 set ● Monitor Nozzle.......................1 set ● Control Unit.............................1 pcs ● Joystick...................................1 pcs ● Cables......................................2 rolls (5m/roll) ● RC Transmitter........................1 pcs ● RC Receiver.............................1 pcs

Related Tags :
Water Cannon Fire Fighting Water Cannon Remote Control Water Cannon
read more
Electric Remote Control Fire Water Cannon for Fire Fighting
Electric Remote Control Fire Fighting Cannon For Fire Vehicle The remote control water cannon was designed as compact and reliable device. Horizontal and vertical positioning is accomplished by remotely controlled electric motors, equipped with insulated handles to facilitate safe manual override. The Fog/Jet nozzle can be adjusted between full jet and spray modes by a separate electric motor. Products Features ● SS304 stainless steel construction. ● Automatic Nozzle supply a stable flow at different flow rate. ● Available controlled both byJoystick at site and RC transmitter wireless. ● Waterproof control system with locking connectors. ● Rotation range 360° ● Elevation range +85°, - 55° ●AC 380V power supply Parameters: Model PSKD150 PSKD180 PSKD180 Flow Range 150 L/S (2375 GPM) 180 L/S (2850 GPM) 200 L/S (3170 GPM) Working Pressure 10 bar 10 bar 10 bar Max Reach @ Max Flow 105 m 110 m 115 m Range of motion -50°~+85° Vert,360° Rotation Max fog angle 120° Turning speed 7 degrees/sec Material (body) 304L Stainless Steel standard （316L Stainless Steel is also available） Material (Gear) Hardcoated anodizing aluminum Material (nozzle) Hardcoated anodizing aluminum Power supply AC 380V Power Consumption normal/Max 50W/300W Weight incl. nozzle appox 55 KG Cable Length Monitor- CPU 5m Cable Length Joystick-CPU 5m standard/ other length available Pipe dimensions for installation 6 Inch Monitor Inlet 6” flange Monitor Outlet 4 inch (100mm) Water way size 4 inch PACKAGE ● SS Monitor..............................1 set ● Monitor Nozzle.......................1 set ● Control Unit.............................1 pcs ● Joystick...................................1 pcs ●Cables......................................2 rolls (5m/roll) ● RC Transmitter........................1 pcs ● RC Receiver.............................1 pcs

Related Tags :
Water Cannon for Fire Fighting
read more

first page
<< 1 2 3 4 5 6 7 >>
last page

A total of

pages