Winner fire service connection is a water connection for the sole purpose of firefighting ...either water dividing or collecting. Connection follows the same process for water and sewerage conncetion
-
Fire Hydrant Water Splitter Wye Fire Hose Ball Valve
Fire Hydrant Water Splitter Wye Fire Hose Ball Valve
1. Product introduction
Our ball valve wyes are designed to divide one stream of water into two, similar to our plain wyes. They’re also equipped with a female swivel inlet and two rigid male outlets. However, the ball valve wye’s ¼ turn handles give the user the ability to shut off water to either outlet.
2. Product Parameter
Item No.
Inlet
Outlet
FHS2515
2½” F Swivel NH
2X1.5” M NH
FHS2515 - 2
2½” F Swivel NST
2x1.5” M NST
3. Products Features
a.Material: Aluminum alloy
b.Inlet and outlet connection to threaded couplings
c.Red paint finish outside.
d.Special connection inlet and outlet available upon request
inquiry now
read more
-
DN45 Siamese Fork Fire Fighting Aluminum Water Divider
DN45 Siamese Fork Fire Fighting Aluminum Water Divider
Water divider is used for dividing water from one way to two way. Each hose line can be shut-off individually by means of a stop valve. Divider is a popular product in the fire protection and water delivery market. Inlet and outlet with adaptors can be connected with hoses coupled with different coupling.
• Inlet & Outlet adaptors: Barcelona, Storz, BS instantaneous, French, Machino, Russian upon request.
• Size: 2.5”x1.5”x1.5”,2.5”x2.5”x2.5”
• Working Pressure:16bar
• Red paint finished outside
Code No.
Inlet size
Outlet size
WF-WD15
2.5”
2x1.5”
WF-WD25
2.5”
2X2.5”
inquiry now
read more
-
Screwdown Valves Water Separator 2 Way Fire Hose Divider
Screwdown Valves Water Separator 2 Way Fire Hose Divider
1.Product introduction
Fire Hose Dividers are used for distributing the extinguishing medium from one feed line over several hose lines, or in special cases for collecting it in the reverse direction. Each hose line can be shut-off individually by means of a stop valve. dividing breeching is a popular product in the fire protection and water delivery market, used commonly to split one length of hose to provide the handler with two or three outlets. It is available to order in a light alloy or gun metal finish.
All of our water delivery products can be adapted for use with any international fittings.
2.Product Parameter
Item No.
Inlet
Outlet
WD-052
2.5”Female thread BSP
2X1.5”Female thread BSP
WD-052A
2.5”Male instantaneous BS336
2x2.5”Female instantaneous BS336
3.Products Features
a.Material:Aluminum alloy / Copper alloy
b.Inlet and outlet connection to BS336 instantaneous
c.Red paint finish outside.
d.Special connection inlet and outlet available upon request
inquiry now
read more
-
Fire Fighting Screwdown Valves 3 Way Dividing Breeching
Fire Fighting Screwdown Valves 3 Way Dividing Breeching
Winner Dividing Breechings are used for distributing fluid flow of one feed line over several hose lines having 2 & 3 Outlets.
Durable, lightweight dividing breechings are constructed of high-quality aluminum with anodized hose adaptors built for rugged use. The dividing breeching opens and closes by means of a positive lift valve to avoid jamming. Revolving handwheels for fast action, and ensure no water hammer.
Other connections are available such as BS336, Storz etc.
Technical Parameters:
Item
Inlet
Outlet
Valve Type
3 Way Dividing Breeching
Storz B
Storz B + 2 x Storz C
Storz C
Storz B + 2x Storz C
Screw Down Valves
Storz C
Storz C + 2 x Storz D
Screw Down Valves
inquiry now
read more
-
Water Splitter Fire Siamese Plain Wye with no Gate Valve or Clapper
Water Splitter Fire Siamese Plain Wye with no Gate Valve or Clapper
1. Product introduction
Fire Siameses are used for distributing the extinguishing medium from one feed line over two hose lines, or in special cases for collecting it in the reverse direction.
It is a popular product in the fire protection and water delivery market, used commonly to split one length of hose to provide the handler with two outlets.
All of our water delivery products can be adapted for use with any international fittings.
2. Product Parameter
Item No.
Inlet
Outlet
FS-I25
2.5” Male Instantaneous Adapter
2X2.5” Female Instantaneous Adapter
3. Products Features
a.Material: Aluminum alloy / Copper alloy
b.Inlet and outlet connection to BS336 instantaneous
c.Red paint finish outside.
d.Special connection inlet and outlet available upon request
inquiry now
read more
-
2 Way Wye Fire Hose Ball Valve
2 Way Wye Fire Hose Ball Valve
Durable, lightweight wye valves are constructed of high-quality aluminum with anodized hose adaptors built for rugged use. The valve opens and closes with a quarter turn. Polymer ball and seat/seal mechanism with o-rings provides a reliable seal and ease of operation at working pressures of 145 psi.
Other connections are available such as BS336, Storz etc.
Technical Parameters:
Item
Inlet
Outlet
Valve Type
2 Way Wye Valve
DN65
DN65*2
Ball Valve
DN80
DN65*2
DN80*2
inquiry now
read more
-
Fire Brigade Three Ways Fire Fighting Water Distributor
Fire Brigade Three Ways Fire Fighting Water Distributor
Fire fighting water distributors are used for distributing the extinguishing medium from one feed line over several hose lines, or in special cases for collecting it in the reverse direction. Each hose line can be shut off individually by means of a stop valve. The stop valve of the dividers must be easy operated in the usual flow direction at 16 bar and in the opposite direction at 6 bar.
Aluminum construction full penetration welds, one storz 4", 5", 6", 12" connection, three Machino 2.5", 3", 6" connections. Other configurations available consult for your specific requirements.
Other connections are available such as BS336, Storz etc.
Technical Parameters:
Item
Inlet
Outlet
Valve Type
Three Ways Water Distributor
DN65
DN65*3
Ball Valve
DN80*3
DN80
DN65*3
DN80*3
DN100
DN65*3
Butterfly Valve
DN80*3
DN125
DN65*3
DN80*3
DN150
DN65*3
Gate Valve
DN80*3
DN300
DN150*3
Butterfly Valve
inquiry now
read more
-
Fire Fighting 3 Way Wye Hose Valve
Fire Fighting 3 Way Wye Hose Valve
Durable, lightweight wye hose valves are constructed of high-quality aluminum with anodized hose adaptors built for rugged use. The valve opens and closes with a quarter turn. Polymer ball and seat/seal mechanism with o-rings provides a reliable seal and ease of operation at working pressures of 145 psi.
Other connections are available such as BS336, Storz etc.
Technical Parameters:
Item
Inlet
Outlet
Valve Type
3 Way Wye Hose Valve
DN65
DN65*3
Ball Valve
DN80
DN65*3
DN80*3
inquiry now
read more
-
Four Ways Fire Fighting Water Segregator
Four Ways Fire Fighting Water Segregator
Fire fighting water segregators are used for distributing the extinguishing medium from one feed line over several hose lines, or in special cases for collecting it in the reverse direction. Each hose line can be shut off individually by means of a stop valve. The stop valve of the dividers must be easy operated in the usual flow direction at 16 bar and in the opposite direction at 6 bar.
Aluminum construction full penetration welds, one storz 5", 6", 12" connection, four Machino 2.5", 3", 6" connections. Other configurations available consult for your specific requirements.
Other connections are available such as BS336, Storz etc.
Technical Parameters:
Item
Inlet
Outlet
Valve Type
Four Ways Fire Fighting Water Segregator
DN125
DN65*4
Butterfly Valve
DN80*4
DN150
DN65*4
DN80*4
DN300
DN150*4
inquiry now
read more
-
Five Ways Fire Hose Water Splitters
Five Ways Fire Hose Water Splitters
Fire hose water splitters are used for distributing the extinguishing medium from one feed line over several hose lines, or in special cases for collecting it in the reverse direction. Each hose line can be shut off individually by means of a stop valve. The stop valve of the dividers must be easy operated in the usual flow direction at 16 bar and in the opposite direction at 6 bar.
Aluminum construction full penetration welds, one storz 5" or 6" connection, five Machino 2.5" or 3" connections. Other configurations available consult for your specific requirements.
Other connections are available such as BS336, Storz etc.
Technical Parameters:
Item
Inlet
Outlet
Valve Type
Five Ways Fire Hose Water Splitters
DN125
DN65*5
Gate Valve
DN80*5
DN150
DN65*5
DN80*5
inquiry now
read more
-
Eight Ports Fire Pump Water Manifold
Eight Ports Fire Pump Water Manifold
Fire manifolds are used for distributing the extinguishing medium from one feed line over several hose lines, or in special cases for collecting it in the reverse direction. Each hose line can be shut off individually by means of a stop valve. The stop valve of the dividers must be easy operated in the usual flow direction at 16 bar and in the opposite direction at 6 bar.
Aluminum construction full penetration welds, one multi lug 12" connection, eight Machino 2.5" connections. Other configurations available consult for your specific requirements.
Other connections are available such as BS336, Storz etc.
Technical Parameters:
Item
Inlet
Outlet
Valve Type
Eight Port Manifold
DN300
DN150*2 DN80*6
Butterfly Valve / Stop Valve
DN150*2 DN65*6
DN80*8
Butterfly Valve
DN65*8
Butterfly Valve
inquiry now
read more
-
Aluminum Collecting Breeching A/2B
Aluminum Collecting Breeching A/2B
The Collecting Breechings are designed to supply water from two separate feed hoses of the same size into one larger drainage hose. It is equipped with a non-return valve that serves to break one supply line in case of pressure drop.
Contains one Ø 110 (A) coupling on one side and two Ø 75 (B) couplings on the other.
Made of light alloy and provided with two Storz B couplings on the inlets. Outlet fitted with Storz A coupling.
Product Parameter
Code No.
B100
Inlet
2 Nos. 2-1/2” Storz Connector or as request
Outlet
4" Storz Connector or as request
Working Pressure
16 Bar
Test pressure
Hydrostatically tested to 24
inquiry now
read more
English
русский
español
