PVC Line Fire Hose
30m-fire-hose

  • Lock Shield Valve
    DN25 Brass Fire Hose Reel Valve 1" Lock Shield Gate Valve with Key
    DN25 Brass Fire Hose Reel Valve 1" Lock Shield Gate Valve with Key Lock shield valves are used to prevent unauthorized operation of the installed Fire Hose Reels. It is installed at the inlet pipe of Hose Reel and can be opened by only key.   A smaller sized pressure reducing valve is used to reduce system pressure to required operating of Fire Hose Reel.   Name Lock Shield Valve Body Material Brass Size 1" Inlet Female BSP Outlet Female BSP Packing  Carton & Pallet Original Made In China
    read more
  • Portable Fire Pump
    Portable Fire Fighting Water Pump
    Portable Fire Fighting Water Pump The JBQ6.0/17-RT is a compact and lightweight portable fire pump with a rated performance of 1020l/min at 6 bar of pressure and a 9 metre lift. Powered by 22.5HP RATO engine, this pump uses a single discharge valve and is available with electric or manual starting.   FEATURES: • Engine: 4 stroke,air-cooled gasoline engine, RATO engine • Max.Power: 22.5HP(16.8KW) • Pump performance • 780L/min@0.7MPa • 1020L/min@0.6Mpa • 1260L/min@0.4Mpa • 1500L/min@0.2MPa • Weight:95KG • Size:655x618x616(mm) PARAMETERS Cylinders 4 stroke,double cylinders,air cooled RATO gasoline engine Max. Output 22.5HP(16.8KW) FuelType Unleaded gasoline Min. 87 octane Fuel Tank Capacity Around 10L Fuel System carburetor,manual choke Lubrication Forced lubrication Engine, oil capacity 1.5L Tank Capacity 6.5L Starter Recoil/Electric starter Lubrication system Splash lubrication Ignition method Transistor electronic ignition Fuel consumption 7L/H Pump Specification Single suction, single stage Inlet Diameter 3" (80mm) Outlet Diameter 2.5"(65mm) Number of outlets 1 Outlet valve type Flat Check Valve Water diversion method Oil free vacuum pump Suction time ≤15S Maximum suction depth 9m Maximum Water Lift 90m Rated Flow 1020L/min Rated Pressure 0.6MPa
    read more
  • EV Fire Blanket
  • Fire Equipments Box
    Fire Equipments Box Fire Hose Stand Hydrant Support Equipment Fire Hydrant Booths
    Fire Equipments Box Fire Hose Stand Hydrant Support Equipment Fire Hydrant Booths   These booths are designed to shelter the hydrant accessories. They are usually used in areas of high humidity or with difficult climates. Weatherproof fiberglass box with pedestal for storing fire hoses outdoors. Made of fiberglass without accessories.  Dimensions Overall Height: 1500mm Box: 650x460x500   OPTIONAL: Accessories characteristics: -1 hose 70mmx15m -2 hose sections 45mmx15m -1 siamese 70x45x45mm -1 plastic nozzle 70mm -2 plastic nozzle 45mm -1 reduction 70x45mm
    read more
  • Wholesale best Fiberglass Fire Extinguisher Cabinet
    Fiberglass Fire Extinguisher Cabinet
    Fiberglass Fire Extinguisher Cabinet   Fiberglass Fire Extinguisher Cabinets are designed to protect fire extinguishers from salt air, chemicals, moisture, dust, insects, temperature extremes, and other harmful elements.   These durably constructed cabinets feature a door-sealing gasket to keep out salt and debris. Includes an easy-view window and corrosion-resistant handle for added convenience. All cabinets come standard with full-length stainless steel hinges, rivets, and latches for added peace of mind. Comes in UV-resistant high-visibility red. Can be used to protect fire extinguishers and other fire safety equipment. Fiberglass Fire Extinguisher Cabinet Features: Chemical-resistant fiberglass construction Easy-view acrylic window Stainless steel hinge and rivets Corrosion-resistant handle Quick-opening stainless steel latches Door-sealing gasket Use: Indoor or outdoor harsh weather use   Specifications: Exterior Dimensions: 770x390x250mm (HxWxD) Max. Ext. Height: 705mm Mount Type: Surface mount (mounting hardware not included) Color: Comes in UV-resistant, high-visibility red
    read more
  • Mini Spanner
    Lightweight Portable Spanner Wrench Firefighting Mini Spanner
    Lightweight Portable Spanner Wrench Firefighting Mini Spanner Mini Spanners are ultra lightweight (2.5oz each!) and fits easily in bunker gear pockets.  Great product to carry with you at all times.  The double tip design allows you to use the spanner multiple ways (push or pull). Approx. dimensions 7" x 1 - 3/8" x 3/8 "   Features: - Ultra-lightweight & Accessible - A practical addition to your set of firefighter tools, our mini spanner weighs only 2.5 ounces each. It fits in your bunker gear pocket, making it easy to access any time, anywhere. - Heavy-duty - Our mini spanner wrench is made of 6061 T6 aluminum, a metal suitable for tough tasks while firefighting. Small yet sturdy and tough, it excels at getting the job done.Tightens Couplings - Use this firefighter spanner wrench to tighten and secure loose couplings. Whether it’s for a standpipe connection or for an attack line, the spanners work on all caps and couplings on the fireground. - Tightens Couplings - Use this firefighter spanner wrench to tighten and secure loose couplings. Whether it’s for a standpipe connection or for an attack line, the spanners work on all caps and couplings on the fireground. - Undoes Couplings - No need to run back to the truck to grab spanners. Keep these mini spanner wrenches in your bunker gear pockets. - Great Value Pack of 2 - This firefighter spanner wrench comes in pairs.
    read more
  • Brass Fog Nozzle
    1.5 Inch Round Bumper Jet Spray Fire Fighting Brass Fog Nozzle
    1.5 Inch Round Bumper Jet Spray Fire Fighting Brass Fog Nozzle 1. Product Introduction  This is a nozzle suitable for connecting with a fire hydrant hose/rack hose. It is a device used to supply water, provided with an adaptor for connection, and it sprays a dense, full stream of water.   It is used for a variety of washdown or standby applications.   2. Product Parameter  Material Brass  Size 1.5 inch Max working pressure 100 psi Flow rate 80 GPM Discharge pattern Capable of complete shutoff, straight stream or any degree of conical fog   3. Product Feature EXACT SIZE - 1-1/2" (38 mm) adjustable fog nozzle. Female 1-1/2" NH/NST will only connect to a male 1-1/2" NH/NST. If you need a 1-1/2" NPSH nozzle, this 1-1/2" NH/NST nozzle will be too big for your hose. Please check the thread of your hose before ordering. MULTIPURPOSE APPLICATION - Recommended for fire hose and fire hose racks for lined or unlined fire hoses. This fire nozzle is for attaching to a fire hose and for extinguishing fires. This spray nozzle is for firefighter fireman stations and also could be for greenhouse applications, dust suppression, and evaporate cooling. PREMIUM MATERIAL - Brass housing and brass stem, brass material for resistance to high temperature and impact, and for corrosion resistance. Excellent watering equipment. 1-1/2" cast brass adjustable fog nozzle EASY TO CONTROL - By rotating to control on and off and adjust spray size, adjusts from straight stream to fog for multipurpose use. Industrial constant flow fog nozzle. Approximate gallons per minute (GPM) - 80. Maximum 100 psi pressure (water only). Provides consistent volume at any spray angle. Capable of complete shutoff, straight stream or any degree of conical fog. 100% SATISFACTION SERVICE - We have a professional fire nozzles development team. If you have any questions about compatibility or any dissatisfaction, please feel free to contact us and we will help you solve it perfectly
    read more
  • Handline Foam Nozzle
    Forestry Fire Fighting Pistol Grip Low Expansion Handline Foam Nozzle
    Forestry Fire Fighting Pistol Grip Low Expansion Handline Foam Nozzle   The PQ2/0.7 series low-multiplication air foam gun can generate and spray air foam to extinguish Class A solid fires and Class B liquid fires, especially in medium-sized oil fires. It is a relatively light handheld firefighting equipment. When the mixture of water and 1% Class A foam fire extinguishing agent passes through the nozzle, the gun body forms a negative pressure under the action of the water flow, so that the negative pressure formed by the shooting speed of the mixed liquid inhales a large amount of air to mix with the mixed liquid. When the air foam is mixed and expanded through the gun barrel, the air foam is sprayed out of the gun barrel after reaching equilibrium, and then the air foam sprayed through the gun barrel is used for fire extinguishing operations. This product is developed for 1% Class A foam fire extinguishing agent, and the unique negative pressure suction structure is suitable for use with 1% Class A or low-multiplication foam fire extinguishing agent. Main Features · Mainly for firefighting forces for various fires and different fire changes. · Made of strong lightweight aluminum alloy, anodized surface treatment. · 360-degree swivel,anti-hose knot · Easy to open and close the water flow by the fastball valve switch · Little recoil force. · Ergonomic, anti-slip polyurethane pistol grip.     Product Parameter    Weight (excl. coupling) 1.5 kgs Material Body Lightweight anodized aluminum Valve Aluminum Alloy Handle Nylon Working pressure 7 bar (100 psi) Flow rate 120 LPM @7 bar Medium Water Foam Mixture Expansion Rate ≥ 9 times Inlet size 1.5 inch Connection coupling Storz,BS,NH,GOST,etc.
    read more

top

Online Now