PVC Line Fire Hose
rubber-backing-epdm-fire-hose

  • Stainless Steel Fire Cabinet
    Fire Equipment Stainless Steel Double Horizontal Fire Hose Reel Cabinet
    Fire Equipment Stainless Steel Double Horizontal Fire Hose Reel Cabinet Fire Hose Reel Cabinets are designed to accommodate fire hose reel, fire fighting equipment and breeching inlet.  Fire Hose Reel Cabinets Parameter Material:  Stainless Steel Mounting: Surface Size: 650*650*160mm, 750*750*280mm, 760*760*240mm or Customerized size Finishing: Brushed Fire hose reel 1"x30M or 3/4"x30M Features 1.Cabinet material made of Stainless Steel Sheet (Full stainless steel brush or mirror finish). 2.Locking of cabinet is either key operated or round handle cam latch. 3.Cabinets are available either in surface mounted or recessed mounted type. 4.Cabinet door shall be solid door or glass door (Clear glass or wired glass). 5.Breeching inlet cabinets are available in horizontal or vertical version.
    read more
  • Fire Hydrant Wrench
    Heavy Duty Adjustable Fire Hydrant Wrench
    Heavy Duty Adjustable Fire Hydrant Wrench It is used to open or close a hydrant by rotating the valve stem, and to remove the caps from the hydrant. Works both a pin and rocker lug.    Features: For pentagon hydrant nuts up to 1 3/4 in. from point to flat Notched to fit 1 1/4 in. square hydrant nut Spanner for pin lug and rocker lug couplings 1 1/2 in. thru 6 in. Plated iron head with 7/8 in. plated steel handle Overall length 18 in.
    read more
  • Fire Fighting Monitor
    Select Flow Portable Fire Fighting Monitor
      Select Flow Portable Fire Fighting Monitor 1.Product Introduction  Fire Fighting Monitors are widely used by Professional Fire Services, Marine & Industrial users around the world and provide attending personnel with a choice of highly manoeuvrable, compact and lightweight Monitors ideally suited to a wide range of applications.   Impresses with Robust and lightweight construction Folding and space-saving Continuously adjustable stream pattern Easy and quick to maneuver, stable operation Can be stored in small spaces on vehicle Low center of gravity for stable operation Unmanned operation possible (observe safety guidelines) Can be delivered with all common coupling systems  2. Product Parameter  Model Rated Working Pressure (Mpa) Working Pressure Range (Mpa) Rated Flow (L/S) Range (m) Pitch Angle Horizontal Angle PSY8/40 0.8 0.5~1.0 20~40 ≥65 30°~80° 90°
    read more
  • Oscillating Portable Monitor
    Fire Fightig Oscillating Portable Monitor
    Fire Fightig Oscillating Portable Monitor   1. Product Introduction  Oscillating portable monitors are extremely compact and lightweight lending itself to easy one-man deployment.  Once sited in the optimum position to target the risk the monitor can be left unmanned thanks to its low profile, stable design saving on man power. Widely used by Professional Fire Services the oscillating portable monitor is suited to a wide range of industry sectors including Fuel Storage Sites, Petrochemical Facilities, Waste Recycling & Bio-Mass Plants, Timber Yards and multiple Marine applications. The spiked legs aid grip on most surfaces and fold away neatly after use for ease of stowage. Elevation between 20° and 80° is possible with rotation via a water driven motor which sweeps the nozzle side to side automatically at 20°, 30° or 40°.  This function can be disengaged to allow a wider sweep. Supplied as standard with 2½” BSP female BSP inlet, the oscillating portable monitor can be fitted with any International inlet adaptors for compatibility to existing hose lines. Impresses with Simple & Quick Operation Automatic Oscillation Highly Manoeuvrable Unmanned Operation Compact & Lightweight Adjustable Elevation & Rotation Ball Shut-Off with Locking Handle Available with all International Inlet Fittings 2. Product Parameter  Model Rated Working Pressure (Mpa) Working Pressure Range (Mpa) Rated Flow (L/S) Range (m) Elevation Oscillating PSY20-40ZB 0.8 0.5~1.0 20~40 ≥55 20°~80° 20°, 30° or 40°
    read more
  • Oscillating Fire Monitor
    Fire Fightig Portable Oscillating Fire Monitor
    Fire Fightig Portable Oscillating Fire Monitor   1.Product Introduction  Oscillating portable monitors are extremely compact and lightweight lending itself to easy one-man deployment.  Once sited in the optimum position to target the risk the monitor can be left unmanned thanks to its low profile, stable design saving on man power. The spiked legs aid grip on most surfaces and fold away neatly after use for ease of stowage. Elevation between 20° and 85° is possible with rotation via a water driven motor which sweeps the nozzle side to side automatically at 20°, 30° or 40°.  This function can be disengaged to allow a wider sweep. Supplied as standard with 2½” BSP female BSP inlet, the oscillating portable monitor can be fitted with any International inlet adaptors for compatibility to existing hose lines. Impresses with Simple & Quick Operation Automatic Oscillation Highly Manoeuvrable Unmanned Operation Compact & Lightweight Adjustable Elevation & Rotation Ball Shut-Off with Locking Handle Available with all International Inlet Fittings Key uses Fire & Rescue Services Marine Sectors Oil & Gas Petrochemicals Fuel Storage Sites Major Industrials Aviation 2.Product Parameter    Model Rated Working Pressure (Mpa) Working Pressure Range (Mpa) Rated Flow (L/S) Range (m) Elevation Horizontal Rotation PSY30-50ZB 1.0 1.0~1.6 30~50 ≥65 20°~85° 360° 
    read more
  • Electric Monitor
    Stainless Steel Electric Remote Control Fire Water Monitor For Fire Fighting
    Stainless Steel Electric Remote Control Fire Water Monitor For Fire Fighting The remote control fire monitor was designed as compact and reliable device. Horizontal and vertical positioning is accomplished by remotely controlled electric motors, equipped with insulated handles to facilitate safe manual override. The Fog/Jet nozzle can be adjusted between full jet and spray modes by a separate electric motor. Products Features 1) SS304 Stainless Steel construction;  2) Constant or Selectable nozzle ;  3) Vertical swing range: -90° to +90° ;  4) Horizontal rotation :360° ;  5) Electric control jetting Pattern: Straight stream,Fog;  6) Electric driver and control unit box are waterproof;  7) Power supply 12V/24V DC(optional),or 100-230 V AC Parameters: Model Number PSKDS 5 PSKDS 10 Flow Rate 5LPS / 300 LPM / 80GPM 10LPS/ 600 LPM / 160 GPM Working Pressure 8 Bar Max Reach 40 m 45 m Max Fog Angle 120° Max Range of Motion 360°horizontal rotation,-55°/+90°vertical elevate (adjustable) Turning Speed 24°/second rotation, 10°/second vertical  Power Supply  DC 24V Power Consumption 24V @ 7.5A Waterway Size 2"(50mm) 2"(50mm) Monitor Outlet 2"(50mm) Monitor Inlet Flange 2.5" ANSI 150# is standard,other size and standard available Material Monitor - SS304 stainless steel (SS316 upon request) Nozzle - Hard coated anodized aluminium alloy          
    read more
  • Water Cannon
    Remote Control Fire Fighting Water Cannon For Fire Vehicle
    Remote Control Fire Fighting Water Cannon For Fire Vehicle The remote control water cannon was designed as compact and reliable device. Horizontal and vertical positioning is accomplished by remotely controlled electric motors, equipped with insulated handles to facilitate safe manual override. The Fog/Jet nozzle can be adjusted between full jet and spray modes by a separate electric motor. Products Features ● SS304 stainless steel construction. ● Automatic Nozzle supply a stable flow at different flow rate. ● Available controlled both byJoystick at site and RC transmitter wireless. ● Waterproof control system with locking connectors. ● Rotation range 360° ● Elevation range +90°, - 55° ● Power supply 12V/24V DC(optional),or 100-230 V AC Parameters: Model PSKD20-40 Flow Range 20-30-40LPS / 1200-1800-2400 LPM  / 320GPM-630GPM, Selectable Working Pressure 6 bar~ 8 bar Max Reach @ Max Flow 60 meters Range of motion -90°~+90° Vert,360° Rotation Max fog angle 120° Turning speed 18 degrees/sec Material (body) 304L Stainless Steel(Standard) 316L Stainless Steel (optional) Material (Gear) Hardcoated anodizing aluminum Material (nozzle) Hardcoated anodizing aluminum Power supply DC 24V(Standard)  DC 12V(Optional)  AC100-230V (Optional) Power Consumption normal/Max 50W/150W Weight incl. nozzle appox 20kg Cable Length Monitor- CPU 5m Cable Length Joystick-CPU 5m standard/ other length available Pump requirement for minimum performance 40L/S@ 6 bar Pipe dimensions for installation 2-2.5 Inch Monitor Inlet 3” or 4"  flange Monitor Outlet 2.5 inch NH Water way size 2.5 inch PACKAGE ● SS Monitor..............................1 set  ● Monitor Nozzle.......................1 set  ● Control Unit.............................1 pcs  ● Joystick...................................1 pcs  ● Cables......................................2 rolls (5m/roll)  ● RC Transmitter........................1 pcs  ● RC Receiver.............................1 pcs
    read more
  • Fire Fighting Cannon
    Electric Remote Control Fire Fighting Cannon For Fire Vehicle
    Electric Remote Control Fire Fighting Cannon For Fire Vehicle The remote control water cannon was designed as compact and reliable device. Horizontal and vertical positioning is accomplished by remotely controlled electric motors, equipped with insulated handles to facilitate safe manual override. The Fog/Jet nozzle can be adjusted between full jet and spray modes by a separate electric motor. Products Features ● SS304 stainless steel construction. ● Automatic Nozzle supply a stable flow at different flow rate. ● Available controlled both byJoystick at site and RC transmitter wireless. ● Waterproof control system with locking connectors. ● Rotation range 360° ● Elevation range +90°, - 55° ● Power supply 12V/24V DC(optional),or 100-230 V AC Parameters: Model PSKD80 Flow Range 1800-4800 LPM Automatic Nozzle Working Pressure 6 bar~ 10 bar Max Reach @ Max Flow 80 meters @ 4800 LPM Range of motion Rotation range 360° Elevation range +90°, - 55° Max fog angle 120° Turning speed 18 degrees/sec Material (body) 304L Stainless Steel(Standard) 316L Stainless Steel (optional) Material (Gear) Hardcoated anodizing aluminum Material (nozzle) Hardcoated anodizing aluminum Power supply DC 24V(Standard) DC 12V(Optional) AC100-230V (Optional) Power Consumption normal/Max 50W/150W Weight incl. nozzle appox 29kg Cable Length Monitor- CPU 5m Cable Length Joystick-CPU 5m standard/ other length available Monitor Inlet 4 inch flange Monitor Outlet 2.5 inch NH Water way size 3 inch PACKAGE ● SS Monitor..............................1 set ● Monitor Nozzle.......................1 set ● Control Unit.............................1 pcs ● Joystick...................................1 pcs ● Cables......................................2 rolls  (5m/roll) ● RC Transmitter........................1 pcs ● RC Receiver.............................1 pcs
    read more
  • Remote Control Water Cannon
    Electric Remote Control Fire Water Cannon for Fire Fighting
    Electric Remote Control Fire Fighting Cannon For Fire Vehicle The remote control water cannon was designed as compact and reliable device. Horizontal and vertical positioning is accomplished by remotely controlled electric motors, equipped with insulated handles to facilitate safe manual override. The Fog/Jet nozzle can be adjusted between full jet and spray modes by a separate electric motor. Products Features ● SS304 stainless steel construction. ● Automatic Nozzle supply a stable flow at different flow rate. ● Available controlled both byJoystick at site and RC transmitter wireless. ● Waterproof control system with locking connectors. ● Rotation range 360° ● Elevation range +85°, - 55° ●AC 380V power supply Parameters: Model PSKD150 PSKD180 PSKD180 Flow Range 150 L/S  (2375 GPM) 180 L/S (2850 GPM) 200 L/S (3170 GPM) Working Pressure 10 bar 10 bar 10 bar Max Reach @ Max Flow 105 m  110 m 115 m Range of motion -50°~+85° Vert,360° Rotation Max fog angle 120° Turning speed 7 degrees/sec Material (body) 304L Stainless Steel standard (316L Stainless Steel is also available) Material (Gear) Hardcoated anodizing aluminum Material (nozzle) Hardcoated anodizing aluminum Power supply AC 380V Power Consumption normal/Max 50W/300W Weight incl. nozzle appox 55 KG Cable Length Monitor- CPU 5m  Cable Length Joystick-CPU 5m standard/ other length available Pipe dimensions for installation 6 Inch Monitor Inlet 6”  flange Monitor Outlet 4 inch (100mm) Water way size 4 inch PACKAGE ● SS Monitor..............................1 set  ● Monitor Nozzle.......................1 set ● Control Unit.............................1 pcs ● Joystick...................................1 pcs ●Cables......................................2 rolls (5m/roll) ● RC Transmitter........................1 pcs ● RC Receiver.............................1 pcs
    read more
  • Portable Monitor
    Wireless RC Fire Fighting Portable Monitor
    Wireless RC Fire Fighting Portable Monitor   1.Product Introduction  Wireless Remote Control Monitors are technologically advanced, electrically controlled portable monitors.  They are suitable for the space where the fire field is far from the water source and the fire truck cannot enter and can be used to extinguish general solid material fires and oil fires, even be used to cool and cool oil tanks. Wireless remote control facilitates effective use of personnel and lowers the potential risk of injury from manual operations. Impresses with Hard coated anodized Aluminium alloy construction; Max. flow rate: 4800 LPM; Straight stream and fog spray; Controlled by RC transmitter wireless; Max. remote control distance 150 meters; Control pannel controlled at site;. Rotation range 360°; Elevation range +30°, +90° Movement recordable,and move automaticlly according to record. 2.Product Parameter  Model PSKDY40ZB PSKDY60ZB PSKDY80ZB Flow rate 2400LPM 3600LPM 4800LPM Working pressure 10 Bar Max. jetting range 65 m 70 m 80 m Inlet size 2.5" NH 2*2.5" NH Outlet size 2.5" NH 2.5" NH 3"NH Horizontal Rotation 360° Vertical Swing +30°~+90° Automatic drainage when water pressure is less than 2 bar, water inside the monitor is drained automatically Spike Anti-skidding tungsten steel spike Safety valve available to close the valve when the monitor is inclined to protect fire fighting man away from damage Energy saving function The power will be shut off when there is no operation for 5 minutes
    read more
  • Foam Fire Monitor
    Manul Fire Control Foam Fire Monitor For Fire Fighting
    Manul Fire Control Foam Fire Monitor For Fire Fighting The Foam/Water Monitor are highly manoeuvrable and easy to operate while delivering much more foam or water. forede Monitors are used across multiple industry sectors including Petrochemical Sites, Fuel Storage Facilities and Waste Recycling Sites. Monitors are compatible with forede's diverse range of master stream nozzles. with features to meet the changing demands of the fire service.  Products Features * Simple to operate  * Foam/Water Nozzle * Easy to service and repair. * Hard coated anodized aluminium alloy Construction Parameters: Model PLZ24 PLZ32 PLZ40 PLZ48 PLZ64 Flow Rate 24LPS 32LPS 40LPS 48LPS 64LPS Working Pressure 10 bar 10 bar 10 bar 10 bar 10 bar Foam Jetting Range 40 Meter 45 Meter 50 Meter 55 Meter 60 Meter Water Jetting Range 45 Meter 50 Meter 55 Meter 60 Meter 65 Meter Foam Expansion >= 6 times >= 6 times >= 6 times >= 6 times >= 6 times Rotation Horizontally 360° 360° 360° 360° 360° Elevate Vertically -45° to 85° -45° to 85° -45° to 85° -45° to 85° -45° to 85° Inlet  DN100(4") DN100(4") DN100(4") DN100(4") DN100(4") Outlet 2.5"NH 2.5"NH 2.5"NH 2.5"NH 2.5"NH Flange Standard BS4504,ANSI150,GB,etc Order Information 1) Specify Adaptor 2) Specify Size 3) Additional Notes
    read more
  • Fire Truck Water Cannon
    20-30-40LPS Fire Truck Water Cannon
    20-30-40LPS Fire Truck Water Cannon Fire water cannons are highly manoeuvrable and easy to operate while delivering much more water. forede Monitors are used across multiple industry sectors including Petrochemical Sites, Fuel Storage Facilities and Waste Recycling Sites. Monitors are compatible with forede's diverse range of master stream nozzles. with features to meet the changing demands of the fire service. Products Features * Simple to operate * Adjustable Nozzle * Easy to service and repair. * Aluminium alloy Construction Key Users * Fire & Rescue Services * Oil & Gas * Petrochemicals * Fuel Storage Sites * Major Industrials * Aviation Product Parameter Material Body Aluminum Alloy Nozzle Aluminum  Alloy Tiller Stainless Steel 304 Flow Range                                     1200-1800-2400 LPM Adjustable Nozzle Max.Fog Angle 120° Jetting Range@10 bar 60 meters@2400LPM Working Pressuce 10  bar  Max Range Of Monitor -45° to +85° Vertically, 360° Rotation Water Way Size 2.5" Outlet 2.5" NH Inlet Flange 4” BS4504 is standard,other standard flange is available
    read more
  • Water Monitor
    Stacked Tips Nozzle Manual Fire Water Monitor
    Stacked Tips Nozzle Manual Fire Water Monitor Fire water monitors are highly manoeuvrable and easy to operate while delivering much more water. forede Monitors are used across multiple industry sectors including Petrochemical Sites, Fuel Storage Facilities and Waste Recycling Sites. Monitors are compatible with forede's diverse range of master stream nozzles. with features to meet the changing demands of the fire service. Products Features 1)Material: Aluminium alloy construction,hard coated anodized; 2)Flow Rate: Adjustablestacked tips 30 - 50 LPS; 3)Jetting Pattern: Straight stream; 4)Moving Range: 360° rotation horizontally, -45° to +90° elevate vertically 5)Flange standard: BS4504,ANSI150,GB,etc. Key Users * Fire & Rescue Services * Oil & Gas * Petrochemicals * Fuel Storage Sites * Major Industrials * Aviation 1) Stacked tips is to adjust the flow rate from 1800LPM to 3000 LPM; 2)Vertical lock is to make the monitor stable; 3)Through the handle to change the monitor's direction, to rotate the monitor 360° & up and down the monitor from -45°to 90°. Product Parameter Model Number PS 30-50T Flow Rate 1800LPM up to 3000LPM Working Pressure 10 Bar Max.Reach@10 Bar 65 m@3000LPM Max.Range of Motion -45° to +75° Vertically, 360° Rotation Waterway Size 2.5"(65mm) Waterway Inlet Flange 4” BS4504 is standard,other standard flange is available Waterway Outlet 2.5” (65mm) NH Male Thread Material Monitor & Nozzle - Hard coated anodized aluminium alloy Tiller - SS304 Stainless steel
    read more
  • Spike Fog Nozzle
    Attic Pistol Grip Attack Piercing Spike Fog Fire Nozzle Gun
    Attic Pistol Grip Attack Piercing Spike Fog Fire Nozzle Gun Fog Spikes delivering fine water sprays through a variety of construction mediums without the need for firefighter entry. Integration with existing fire appliance pumps ensures complete compatibility of use - there are no ‘special requirements’ needed to existing equipment to use the Fog Spikes.  The Fog Spikes are specifically designed to allow operatives to attack and improve pre-entry compartment fire conditions by rapidly reducing internal temperatures significantly reducing risk to firefighters and greatly limiting water damage. Main Features * Designed to efficiently extinguish fire in confined and hard-to- reach areas, such as storage facilities, attics and mobile homes. * Quick penetration of glass, crevice in masonry walls, concrete blocks, metal sheets and plywood * Provides rapid attack on hidden trouble spots * Impinging jets for a dense fog pattern Applications Roof, Loft and Basement Fires  Thatch Fires  Room / Compartment Fires  Shop Fires  Shed / Warehouse Fires  Car & Lorry Fires  Skip & Waste Bin Fires  Peat Fires  Brush / Forest Fires  Shipping Container Fires  Cabin Fires  Aircraft Fires  Waste Recycling Pile Fires  Mud / Silt Aeration    Specification Model Number WFN - P600 Material Anodized Aluminum Alloy Inlet Size 1.5"(40mm) , 2" ( 50mm ) , 2.5"(65mm)  Coupling Storz/NH/BSP/Russian type, etc.     Flow Rate 600LPM Working Pressure  7 Bar
    read more
  • Fire Hydrant Hose Nozzle
    Plastic Fire Hydrant Hose Nozzle
    Plastic Fire Hydrant Hose Nozzle 1.Product Introduction  This is a nozzle suit to connect with fire hydrant hose / rack hose. It is a device used to supply water, provided with a adaptor for connection to spray a dense, full stream of water. 2.Product Parameter  Material Plastic Size 1.5 inch Max working pressure 100 psi Flow rate 80 GPM Discharge pattern Capable of complete shutoff, straight stream or any degree of conical fog 3. Product Feature Made of polyamide resin with rubber gaskets. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.
    read more
  • Fire Hose Diffuser
    BS Quick Connect Spray Jet Fire Hose Diffuser Nozzle
    BS Quick Connect Spray Jet Fire Hose Diffuser Nozzle 1.Product Introduction  Fire Hose Diffuser Nozzles are widely demanded in fire brigades as the basic firefighting nozzle. It is offered in in different metals as per the requirements. The short one can easily fit with a choice of nozzles to suit the flow and operational requirement.  2.Product Parameter  Material Aluminum  Size 2.5 Inch Working pressure 16 Bar Discharge pattern Jet Spray 3. Product Feature Made of aluminum alloy material with rubber bumper. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.
    read more

top

Online Now