1.CE approved 2.EN14540 Standard for fire hose 3.OEM/ODM service 4.Flexible and foldable

1.Brass Material,Great quality. 2.Quality standard to the National fire fighting equipment, CCC certificated with ISO9001 quality management approve. 3.Service: OEM/ODM service for diameter, material, length, painting color working pressure etc.

1.Brass Material,Great quality. 2.Quality standard to the National fire fighting equipment, CCC certificated with ISO9001 quality management approve. 3.Service: OEM/ODM service for diameter, material, length, painting color working pressure etc.

1.Brass Material,Great quality. 2.Quality standard to the National fire fighting equipment, CCC certificated with ISO9001 quality management approve. 3.Service: OEM/ODM service for diameter, material, length, painting color working pressure etc.

Ductile Iron Y Type Strainer This product is designed for remove foreign matter from pipe lines and provides protection for pumps, meters, valves, and other similar mechanical equipment, which is called as Strainer. "Y" Type Strainers are named after their shape and normally used for course filtration. But with large filtration area can be used with fine mesh also.   The Strainer improves the clearance in the medium, and prolongs the life of valves; protect expensive pumps, meters and other equipments.  A Y-strainer can be installed in either a horizontal or vertical position (Downward flow) with the screen elementpointing downward. This allows the strainer screen to collect material in the strainer at the lowest point of the screen.

Ductile Iron Groove Type Signal 6 Inch Water Gate Valve The signal gate valve is mainly used in the pipeline of the fire water system as a function of opening and intercepting the fluid in the pipeline, and converting the opening and closing working state into an electric signal through the signal device. The elastic seat sealing gate valve signal gate valve encapsulating the whole valve disc to generate a deformation compensation effect to achieve a good sealing effect, overcome the general gate valve sealing failure, water leakage, and rust phenomenon, more effective saving installation space.   It's mainly composed by the signal device, valve body, valve cover, disc assembly, stem, stem nut, hand wheel and other components. The annunciator is mainly composed of a transmission gear, a transmission rod and a micro switch. Gate Valve Applications Gate valves are used in almost all fluid services such as air, fuel gas, feedwater, steam, lube oil, hydrocarbon, and all most any services. Some special gate valve is used in slurry and powder product also such as knife gate valve Advantages of Gate Valve Gate valve provides good pressure drop during operation  Most of the gate valve can be used as bi-directional They are suitable for high pressure and temperature application and required less maintenance

8 Inch Flange Type Signal Gate Valve The signal gate valve is mainly used in the pipeline of the fire water system as a function of opening and intercepting the fluid in the pipeline, and converting the opening and closing working state into an electric signal through the signal device. The elastic seat sealing gate valve signal gate valve encapsulating the whole valve disc to generate a deformation compensation effect to achieve a good sealing effect, overcome the general gate valve sealing failure, water leakage, and rust phenomenon, more effective saving installation space.   It's mainly composed by the signal device, valve body, valve cover, disc assembly, stem, stem nut, hand wheel and other components. The annunciator is mainly composed of a transmission gear, a transmission rod and a micro switch. Gate Valve Applications Gate valves are used in almost all fluid services such as air, fuel gas, feedwater, steam, lube oil, hydrocarbon, and all most any services. Some special gate valve is used in slurry and powder product also such as knife gate valve Advantages of Gate Valve Gate valve provides good pressure drop during operation  Most of the gate valve can be used as bi-directional They are suitable for high pressure and temperature application and required less maintenance    Product Parameter   DN L H H1 W C n-D E T F 50 178 233 123 203 125 4-φ19 165 19 3 65 190 233 93 203 145 4-φ19 185 19 3 80 203 270 100 203 160 8-φ19 200 20 3 100 229 322 110 203 180 8-φ19 220 20 3 125 254 355 125 280 210 8-φ19 250 20 3 150 267 401 143 280 240 8-φ19 285 20 3 200 292 516 170 330 295 8-φ23 340 21 3 250 330 638 203 382 355 12-φ23 406 26 3 300 356 717 230 420 410 12-φ28 460 26 4 350 381 844 260 420 470 16-φ28 520 26.5 4 400 406 935 282 420 525 16-φ31 580 28 4

Ductile Iron Non Rising Stem Flange Type Gate Valve There is no upward movement of the stem in a non-rising stem type. The valve disk is threaded internally. The disc travels along the stem like a nut when the stem is rotated. You can see the image. In this type of valve, stem threads are exposed to the flow medium. Therefore, this design is used where space is limited to allow linear stem movement, and the flow medium does not cause erosion, corrosion, or wear and tear to stem material.  This type of valve also known as insider screw valve. Gate Valve Applications Gate valves are used in almost all fluid services such as air, fuel gas, feedwater, steam, lube oil, hydrocarbon, and all most any services. Some special gate valve is used in slurry and powder product also such as knife gate valve Advantages of Gate Valve Gate valve provides good pressure drop during operation  Most of the gate valve can be used as bi-directional They are suitable for high pressure and temperature application and required less maintenance    Product Parameter   DN L H H1 W C n-D50 E T F 50 178 233 123 203 125 4-φ19 165 19 3 65 190 233 93 203 145 4-φ19 185 19 3 80 203 270 100 203 160 8-φ19 200 20 3 100 229 322 110 203 180 8-φ19 220 20 3 125 254 355 125 280 210 8-φ19 250 20 3 150 267 401 143 280 240 8-φ19 285 20 3 200 292 516 170 330 295 8-φ23 340 21 3 250 330 638 203 382 355 12-φ23 406 26 3 300 356 717 230 420 410 12-φ28 460 26 4 350 381 844 260 420 470 16-φ28 520 26.5 4 400 406 935 282 420 525 16-φ31 580 28 4

Groove Type Butterfly Valve with Handles Butterfly valve is a valve that isolates or regulates the flow of a fluid. The closing mechanism is a disk that rotates.   Products Features Operation is similar to that of a ball valve, which allows for quick shut off. Butterfly valves are generally favored because they cost less than other valve designs, and are lighter weight so they need less support. The disc is positioned in the center of the pipe. A rod passes through the disc to an actuator on the outside of the valve. Rotating the actuator turns the disc either parallel or perpendicular to the flow.

1.5 Inch Aluminum Barcelona Fire Hose Couplings Barcelona Couplings consist of three interlocking lugs, which provide a quick connect and disconnect system. They are manufactured from aluminium and brass and confrom with Spanish standard. They are recommended for delivery applications only. Key Features Provide a quick connect and disconnect system. Three lug design connects to any adaptor type. Availability Please note: Minimum order quantities may apply on certain parts, please enquire. Related product to Aluminum  Russian Gost type fire hose coupling We serve customers for over 30 years — so we’ve got the knowledge and industry experience to help you get it right. If you would like to know more fire hose, just click fire hose coupling. or Send inquiry now.

Fire Equipment Stainless Steel Double Horizontal Fire Hose Reel Cabinet Fire Hose Reel Cabinets are designed to accommodate fire hose reel, fire fighting equipment and breeching inlet.  Fire Hose Reel Cabinets Parameter Material:  Stainless Steel Mounting: Surface Size: 650*650*160mm, 750*750*280mm, 760*760*240mm or Customerized size Finishing: Brushed Fire hose reel 1"x30M or 3/4"x30M Features 1.Cabinet material made of Stainless Steel Sheet (Full stainless steel brush or mirror finish). 2.Locking of cabinet is either key operated or round handle cam latch. 3.Cabinets are available either in surface mounted or recessed mounted type. 4.Cabinet door shall be solid door or glass door (Clear glass or wired glass). 5.Breeching inlet cabinets are available in horizontal or vertical version.

Type C Underground Hydrant Key with Hook The underground hydrant key is used to open the covers of underground hydrates and the valves for opening water in underground hydrants.   Hydrant key for underground hydrant (s) that is manufactured from black enamelled heavy steel. Underground hydrant key of quality including well hook. Key for operating built-in fittings and for various valves and underground hydrants.   Specification Length 110 cm Including pit hook (cover crook) Dimensions 32 × 32 × 1100 mm Type C. According to regulation DIN 3223

Red Overground Hydrant Key Type A Overground hydrant key type A: internal triangular type A solid steel design for overground hydrant, protective coating (malleable casting) in red length approx. 43 cm   Features: Type A For Overground hydrants Inner triangular type A Solid steel design Protective coating (malleable casting) in red Length: approx. 43 cm 

Plastic Fire Hydrant Hose Nozzle 1.Product Introduction  This is a nozzle suit to connect with fire hydrant hose / rack hose. It is a device used to supply water, provided with a adaptor for connection to spray a dense, full stream of water. 2.Product Parameter  Material Plastic Size 1.5 inch Max working pressure 100 psi Flow rate 80 GPM Discharge pattern Capable of complete shutoff, straight stream or any degree of conical fog 3. Product Feature Made of polyamide resin with rubber gaskets. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.

BS Quick Connect Spray Jet Fire Hose Diffuser Nozzle 1.Product Introduction  Fire Hose Diffuser Nozzles are widely demanded in fire brigades as the basic firefighting nozzle. It is offered in in different metals as per the requirements. The short one can easily fit with a choice of nozzles to suit the flow and operational requirement.  2.Product Parameter  Material Aluminum  Size 2.5 Inch Working pressure 16 Bar Discharge pattern Jet Spray 3. Product Feature Made of aluminum alloy material with rubber bumper. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.