Aluminum Gost 2 inch Fire Hose Nozzle   1.Product introduction  Gost fire hose nozzle is a fire extinguishing device connected to a hose to spray a dense, full stream of water. It has the advantages of long range and large amount of water.   2.Product Parameter  Material Aluminum Size 51mm / 66mm  Working pressure 16 Bar Test pressure 24 Bar Discharge pattern Solid uniform Jet Pattern  

2.5 inch John Morris Instaneous Fire Fighting Branch Pipe   1.Product Description Branch pipe,its inlet connection is 21/2” male instantaneous and outlet is Solid Jet nozzle.Material of construction maybe copper alloy or aluminum alloy.   2.Product Parameter  Material Brass Aluminum Size 65mm  Working pressure 16 Bar Test pressure 24 Bar Discharge pattern Solid uniform Jet Pattern   3.Products Features A.Its operating pressure is 150 PSI Max and is naturally polished,It is a basic fire fighting nozzle commonly used by most fire Brigades.These smooth bore tips creates concentrated jet pattern of water flow with maximun reach. B.This nozzle is available with two orifice sizes:12mm and 19mm C.Application:hydrant system,wet or dry riser system 

2.5 inch Machino Nozzle Jet and Spray Branch Pipe   1.Product Description Machino Nozzle Branch pipe,its inlet connection is 2 1/2” storz / male instantaneous / male machino and outlet is Solid Jet nozzle. Material of construction is aluminum alloy.   2.Product Parameter    Model Number WFN - MBP25 Weight:  1.5 kg Fire nozzle body Material Aluminum Fire Nozzle Bumper Material Rubber  Coupling Storz, Instaneous, Machino Working Pressure  8 Bar Max Reach @ Max Flow 40 m Fire Nozzle Type Branch Pipe Spraying Type Jet / Fog   3.Products Features  A. Its operating pressure is 8bar to 12bar jet and spray type with rubber handle,It is a basic fire fighting nozzle commonly used by most fire Brigades. B. This nozzle is available with two orifice sizes:16mm or 19mm C. Application:hydrant system,wet or dry riser system 

2.5'' Brass Thread Inlet Oblique Fire Hydrant Landing Valve Landing valves are suitable for installation on wet risers in a building for fire fighting purposes, permanently charged with water from a pressurized supply. The landing valves are oblique type with threaded inlet and are manufactured with delivery hose connection and blank cap. The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bar.   Technical Data Valve Type Oblique, Threaded Inlet Pressure Rating Low Pressure Valve Nominal Size DN 2 1/2" Working Pressure 15 Bar Maximum Test Pressure Valve Seat Test at 16.5 Bar • Body Test at 22.5 Bar Water Flow Rate 8.5 L/S @ 4 Bar Outlet Pressure

2.5 Inch Flange Inlet Oblique Fire hydrant Landing Valve The landing valves are pressure reducing type designed to provide a range of outlet pressure (5 bar -8 bar). The Landing valves are classified under high pressure and are suitable for use at nominal inlet pressure up to 20 bar. High quality with most favourable price. Pressure reducing oblique landing valves are suitable for installation on wet risers in buildings for fire fighting purposes, permanently charged with water from a pressurised supply.   Code No. Inlet Outlet WFLV - PR25 BS4504 PN16 65MM 2.5”BS336 INST.FEMALE WFLV - PR25A BS4504 PN16 80MM 2.5”BS336 INST.FEMALE WFLV - PR25B Male BSP Thread 65mm 2.5”BS336 INST.FEMALE  Valve type:Oblique flanged inlet Pressure Rating:HP or LP Nominal Size:DN65 Test pressure:valve seat test at 22bar,body test at 30bar Flange drilling:BS4504   Product Features: 1. Suitable for inlet pressure up to 20bar 2.Reduced outlet static pressure can be set from 5 to 8bar 3.Outlet pressure remain constant with inlet pressure range from 7bar to 20bar 4. Pressure test to 30bar 5.Minimum Flowrate up to 1400L/M 6.Body : Copper Alloy to BS 1400 7.Handwheel : Grey Cast Iron to BS 1452 8.Inlet:Male 2.5"BSP 9.Outlet : Female instantaneous to BS 336 and other connections

2 Inch Brass Oblique Fire Valve Storz Fire Valve is a connector to fire water supply with the valve interface, used for factory, warehouse, high-rise buildings, public buildings and ship, normally installed in fire hydrant box, with fire hoses and water gun or wait for equipment supporting the fire equipment .   Type: Fire Valve Storz Model: WFHV - B50 Material: Brass Inlet interface: 50 mm / 2 inch Rated working pressure: 1.6 Mpa For water and foam mixed liquid only Standard: Manufacture and certified to DIN 14461    Name Indoor fire hydrant Body Material Brass Valve Rod Material Brass Size 50mm Packing Carton with pallet Delivery time 15-20 days OEM Avaliable Original Made In China

Diaphragm Style Fire Alarm Deluge Valve Price Deluge Valve is known as a system control valve in a deluge system, used for fast application of water in a spray system. Deluge valve protects areas such as power transformer installation, storage tank, conveyor protection and other industrial application etc. With the addition of foaming agent they do protect aircraft hanger and inflammable liquid fire.   Model Norminal Diameter (mm) Working Pressure   (MPa) Drive Time(s) S-ZSFM-100 DN100 1.2~1.6 <15 S-ZSFM-125 DN125 1.2~1.6 <15 S-ZSFM-150 DN150 1.2~1.6 <15   Technical Data Body Material Ductile Iron  Pipe Material Stainless Steel 304 Ball Valve Material Brass Fire Alarm BellMaterial Stainless Steel 304 Size (mm) DN100,DN125,DN150,DN200,DN250 Production Standard GB5135.5~2003 Solenoid Valve Voltage DC24V Application fire fighting, foam system, fire protection system,fire sprinkler system Operation solenoid control, hydraulic, electric actuation

Ductile Iron Groove Type Signal 6 Inch Water Gate Valve The signal gate valve is mainly used in the pipeline of the fire water system as a function of opening and intercepting the fluid in the pipeline, and converting the opening and closing working state into an electric signal through the signal device. The elastic seat sealing gate valve signal gate valve encapsulating the whole valve disc to generate a deformation compensation effect to achieve a good sealing effect, overcome the general gate valve sealing failure, water leakage, and rust phenomenon, more effective saving installation space.   It's mainly composed by the signal device, valve body, valve cover, disc assembly, stem, stem nut, hand wheel and other components. The annunciator is mainly composed of a transmission gear, a transmission rod and a micro switch. Gate Valve Applications Gate valves are used in almost all fluid services such as air, fuel gas, feedwater, steam, lube oil, hydrocarbon, and all most any services. Some special gate valve is used in slurry and powder product also such as knife gate valve Advantages of Gate Valve Gate valve provides good pressure drop during operation  Most of the gate valve can be used as bi-directional They are suitable for high pressure and temperature application and required less maintenance

8 Inch Flange Type Signal Gate Valve The signal gate valve is mainly used in the pipeline of the fire water system as a function of opening and intercepting the fluid in the pipeline, and converting the opening and closing working state into an electric signal through the signal device. The elastic seat sealing gate valve signal gate valve encapsulating the whole valve disc to generate a deformation compensation effect to achieve a good sealing effect, overcome the general gate valve sealing failure, water leakage, and rust phenomenon, more effective saving installation space.   It's mainly composed by the signal device, valve body, valve cover, disc assembly, stem, stem nut, hand wheel and other components. The annunciator is mainly composed of a transmission gear, a transmission rod and a micro switch. Gate Valve Applications Gate valves are used in almost all fluid services such as air, fuel gas, feedwater, steam, lube oil, hydrocarbon, and all most any services. Some special gate valve is used in slurry and powder product also such as knife gate valve Advantages of Gate Valve Gate valve provides good pressure drop during operation  Most of the gate valve can be used as bi-directional They are suitable for high pressure and temperature application and required less maintenance    Product Parameter   DN L H H1 W C n-D E T F 50 178 233 123 203 125 4-φ19 165 19 3 65 190 233 93 203 145 4-φ19 185 19 3 80 203 270 100 203 160 8-φ19 200 20 3 100 229 322 110 203 180 8-φ19 220 20 3 125 254 355 125 280 210 8-φ19 250 20 3 150 267 401 143 280 240 8-φ19 285 20 3 200 292 516 170 330 295 8-φ23 340 21 3 250 330 638 203 382 355 12-φ23 406 26 3 300 356 717 230 420 410 12-φ28 460 26 4 350 381 844 260 420 470 16-φ28 520 26.5 4 400 406 935 282 420 525 16-φ31 580 28 4

Ductile Iron 6 Inch Flange OS&Y Gate Valve One type of valve commonly used to control water flow to fire sprinkler systems is known as an OS&Y gate valve. OS&Y means “outside stem and yoke” or "outside screw and yoke".   OS&Y gate valves operate by opening and closing via a gate, which lowers into or rises out of the valve. Raising the gate allows water to flow through the valve while lowering the gate cuts off the water flowing through the valve. When fully open, the typical gate valve has no obstruction in the flow path, resulting in very low friction loss.   Products Features - Precision-machined valve stem, reduces operating torque. - Non-toxic powder epoxy resin spraying on botn inside and outside of the valve to enhance corrosion resistance and improve water quality. - The valve plate is covered with rubber both inside and outside to guaranteed good sealing. It has strong connection to avoid fall off after long-term use. - Thrust bearings reduce frictional resistance and reduce operating torque.   Product Parameter   DN D D1 NO.×NXφ L H(Close) H(Open) 40 150 110 4×18 178 322 374 50 165 125 4×18 178 322 374 65 185 145 4×18 190 332 395 80 200 160 8×18 203 350 429 100 220 180 8×18 229 420 524 125 250 210 8×18 254 581 721 150 285 240 8×22 267 581 736 200 340 295 12×22 292 736 942 250 405 355 12×26 325 880 1013 300 460 410 12×26 356 1009 1117 350 520 470 16×26 385 1300 1655 400 580 525 16×30 406 1380 1805 450 640 585 20×30 432     500 725 650 20×33 457     600 840 770 20×36 508    

Manual Operated Ductile Iron 4 Inch Butterfly Valve DN200 Butterfly valve is a valve that isolates or regulates the flow of a fluid. The closing mechanism is a disk that rotates.   Products Features Operation is similar to that of a ball valve, which allows for quick shut off. Butterfly valves are generally favored because they cost less than other valve designs, and are lighter weight so they need less support. The disc is positioned in the center of the pipe. A rod passes through the disc to an actuator on the outside of the valve. Rotating the actuator turns the disc either parallel or perpendicular to the flow.   Product Parameter Model A C D ZSXF-50-D(G) 90 55 60.3 ZSXF-65-D(G) 90 65 76.1 ZSXF-80-D(G) 100 70 88.9 ZSXF-100-D(G) 110 87 114.3 ZSXF-125-D(G) 110 100 139.7 ZSXF-150-D(G) 110 115 165.1 ZSXF-200-D(G) 134 150 219.1

Fire Sprinkler Protective Chrome Finished Fire Sprinkler Guard