Wholesale Best Brass Marine Fire Nozzle Products,Brass Marine Fire Nozzle Suppliers,manufacturers

Categories

Contact Us

86-0595-86801910 ivy.xiao7 info@winnerfirehose.com

Hot products

brass-marine-fire-nozzle

View :

Grid View List View

Forged Y Siamese Water Divider Straight Fire Department Connection
Forged Y Siamese Water Divider Straight Fire Department Connection Fire department connection is one of the most important and convenient allies for firefighters on-site. Because of this, there are several requirements in place to guarantee its accessibility. One of them has to do with the distance between a building’s fire hydrant and its Siamese connection. The two Siamese couplings connect servicing hoses that pump water from fire engines. • Single clapper / double clapper designs • Technical: Forged • 2 1/2” swivels ring are pin lug design for ease of use and compatibility with local fire service districts. • Including 2 plug of U.S.A. 2.5" NST polished with chain and plate for fire department. Code No. Inlet size Outlet size WF - FDC01 F 4”BSP 2xF2.5”NST WF - FDC01A F 4”NPT 2xF2.5”NST

Related Tags :
Fire Department Connection Straight Fire Department Connection Siamese Water Divider
read more
FDC 90 Brass Water Divider Fire Department Connection
FDC 90 Brass Water Divider Fire Department Connection Fire department connection is one of the most important and convenient allies for firefighters on-site. Because of this, there are several requirements in place to guarantee its accessibility. One of them has to do with the distance between a building’s fire hydrant and its Siamese connection. The two Siamese couplings connect servicing hoses that pump water from fire engines. • Single clapper / double clapper designs • Technical: Forged • 2 1/2” swivels ring are pin lug design for ease of use and compatibility with local fire service districts. • Including 2 plug of U.S.A. 2.5" NST polished with chain and plate for fire department. Code No. Inlet size Outlet size WF - FDC02 F 4”BSP 2xF2.5”NST WF - FDC02A F 4”NPT 2xF2.5”NST

Related Tags :
FDC 90 Brass Water Divider
read more
2 inch 52mm Plastic Straight Fire Nozzle
2 inch 52mm Plastic Straight Fire Nozzle 1.Product Introduction Straight fire nozzle,its inlet connection is 2” storz and outlet is straight stream nozzle.Material of construction is aluminum alloy and plastic. 2.Product Parameter Material Aluminum & Plastic Size 25mm / 50mm / 65mm Working pressure 8 Bar Discharge pattern Solid uniform Jet Pattern 3.Products Features Its operating pressure is 116 PSI Max and is naturally polished,It is a basic fire fighting nozzle commonly used by most fire Brigades.These smooth bore tips creates concentrated jet pattern of water flow with maximun reach.

Related Tags :
Straight Fire Nozzle Plastic Straight Fire Nozzle 2 inch Fire Nozzle
read more
Portable Fire Fighting Monitor
Ductile Portable Fire Fighting Monitor The portable fire fighting monitor from Winner can be used for firefighting, cooling or as a water shield, among others. It is used manned or unmanned, as required. Impressed with Robust and lightweight construction Folding and space-saving Continuously adjustable stream pattern Easy and quick to maneuver, stable operation Can be stored in small spaces on vehicle Low center of gravity for stable operation Unmanned operation possible (observe safety guidelines) Can be delivered with all common coupling systems Product Parameter Model Rated Working Pressure (Mpa) Working Pressure Range (Mpa) Rated Flow (L/S) Range (m) Pitch Angle Horizontal Angle Spray Angle PS 20 0.8 0.5~1.2 20 ≥48 -30°~70° 360° ≥100° PS 30 30 ≥55 PS 40 40 ≥60 PS 50 50 ≥70

Related Tags :
Fire Fighting Monitor Fire Monitor Portable Fire Monitor
read more
Europe Aluminum Fire Hydrant Standpipe
Europe Aluminum Fire Hydrant Standpipe The standpipe for underground hydrant with one or two outlets with valve and Storz coupling C or B is used to take water from undergroundwater hydrants and supply water to a specific location. The single-spout attachment is used for underground hydrants with lower water flow. Specification Material: Aluminum Alloy Outlets: 2 way Valve Type: Screw Down Size: C2C, B2C, B2B 2.Parameters Model Inlet Outlet HS-C2C 2" (DN52) 2X2" STORZ C HS-B2C 3" (DN 80) 2X STORZ C HS-B2B 3" (DN 80) 2X STORZ B

Related Tags :
Hydrant Standpipe Fire Hydrant Standpipe Aluminum Hydrant Standpipe Europe Hydrant Standpipe
read more
New Design Space Saving Red Powder Coated Fire Prevention Fire Fighting Sand Box
New Design Space Saving Red Powder Coated Fire Prevention Fire Fighting Sand Box Fire sand boxes for fires that cannot be extinguished with water. The box is smooth and grain-free bulge, electrostatic spray paint, smooth, clean and tidy, moisture-proof. Thickened high-strength box: the use of high-quality thickened steel processing, high hardness durable. Innovative space saving design: box can be disassembled for shipping. Cabinet Material Size Application area Steel 60x60x60cm Gas station / workshop Steel 60x60x100cm Gas station / workshop Steel 100x100x100cm Gas station / workshop

Related Tags :
Fire Sand Box Fire Fighting Sand Box Fire Sandbox
read more
Fire Equipment Stainless Steel Double Horizontal Fire Hose Reel Cabinet
Fire Equipment Stainless Steel Double Horizontal Fire Hose Reel Cabinet Fire Hose Reel Cabinets are designed to accommodate fire hose reel, fire fighting equipment and breeching inlet. Fire Hose Reel Cabinets Parameter Material: Stainless Steel Mounting: Surface Size: 650*650*160mm, 750*750*280mm, 760*760*240mm or Customerized size Finishing: Brushed Fire hose reel 1"x30M or 3/4"x30M Features 1.Cabinet material made of Stainless Steel Sheet (Full stainless steel brush or mirror finish). 2.Locking of cabinet is either key operated or round handle cam latch. 3.Cabinets are available either in surface mounted or recessed mounted type. 4.Cabinet door shall be solid door or glass door (Clear glass or wired glass). 5.Breeching inlet cabinets are available in horizontal or vertical version.

Related Tags :
Stainless Steel Fire Cabinet SS Fire Cabinet Fire Hose Reel Cabinet
read more
Heavy Duty Adjustable Fire Hydrant Wrench
Heavy Duty Adjustable Fire Hydrant Wrench It is used to open or close a hydrant by rotating the valve stem, and to remove the caps from the hydrant. Works both a pin and rocker lug. Features: For pentagon hydrant nuts up to 1 3/4 in. from point to flat Notched to fit 1 1/4 in. square hydrant nut Spanner for pin lug and rocker lug couplings 1 1/2 in. thru 6 in. Plated iron head with 7/8 in. plated steel handle Overall length 18 in.

Related Tags :
Fire Hydrant Wrench Adjustable Fire Hydrant Wrench Hydrant Wrench
read more
Select Flow Portable Fire Fighting Monitor
Select Flow Portable Fire Fighting Monitor 1.Product Introduction Fire Fighting Monitors are widely used by Professional Fire Services, Marine & Industrial users around the world and provide attending personnel with a choice of highly manoeuvrable, compact and lightweight Monitors ideally suited to a wide range of applications. Impresses with Robust and lightweight construction Folding and space-saving Continuously adjustable stream pattern Easy and quick to maneuver, stable operation Can be stored in small spaces on vehicle Low center of gravity for stable operation Unmanned operation possible (observe safety guidelines) Can be delivered with all common coupling systems 2. Product Parameter Model Rated Working Pressure (Mpa) Working Pressure Range (Mpa) Rated Flow (L/S) Range (m) Pitch Angle Horizontal Angle PSY8/40 0.8 0.5~1.0 20~40 ≥65 30°~80° 90°
read more
Fire Fightig Oscillating Portable Monitor
Fire Fightig Oscillating Portable Monitor 1. Product Introduction Oscillating portable monitors are extremely compact and lightweight lending itself to easy one-man deployment. Once sited in the optimum position to target the risk the monitor can be left unmanned thanks to its low profile, stable design saving on man power. Widely used by Professional Fire Services the oscillating portable monitor is suited to a wide range of industry sectors including Fuel Storage Sites, Petrochemical Facilities, Waste Recycling & Bio-Mass Plants, Timber Yards and multiple Marine applications. The spiked legs aid grip on most surfaces and fold away neatly after use for ease of stowage. Elevation between 20° and 80° is possible with rotation via a water driven motor which sweeps the nozzle side to side automatically at 20°, 30° or 40°. This function can be disengaged to allow a wider sweep. Supplied as standard with 2½” BSP female BSP inlet, the oscillating portable monitor can be fitted with any International inlet adaptors for compatibility to existing hose lines. Impresses with Simple & Quick Operation Automatic Oscillation Highly Manoeuvrable Unmanned Operation Compact & Lightweight Adjustable Elevation & Rotation Ball Shut-Off with Locking Handle Available with all International Inlet Fittings 2. Product Parameter Model Rated Working Pressure (Mpa) Working Pressure Range (Mpa) Rated Flow (L/S) Range (m) Elevation Oscillating PSY20-40ZB 0.8 0.5~1.0 20~40 ≥55 20°~80° 20°, 30° or 40°

Related Tags :
Oscillating Portable Monitor Fire Portable Monitor Fire Fighting Oscillating Monitor
read more
Fire Fightig Portable Oscillating Fire Monitor
Fire Fightig Portable Oscillating Fire Monitor 1.Product Introduction Oscillating portable monitors are extremely compact and lightweight lending itself to easy one-man deployment. Once sited in the optimum position to target the risk the monitor can be left unmanned thanks to its low profile, stable design saving on man power. The spiked legs aid grip on most surfaces and fold away neatly after use for ease of stowage. Elevation between 20° and 85° is possible with rotation via a water driven motor which sweeps the nozzle side to side automatically at 20°, 30° or 40°. This function can be disengaged to allow a wider sweep. Supplied as standard with 2½” BSP female BSP inlet, the oscillating portable monitor can be fitted with any International inlet adaptors for compatibility to existing hose lines. Impresses with Simple & Quick Operation Automatic Oscillation Highly Manoeuvrable Unmanned Operation Compact & Lightweight Adjustable Elevation & Rotation Ball Shut-Off with Locking Handle Available with all International Inlet Fittings Key uses Fire & Rescue Services Marine Sectors Oil & Gas Petrochemicals Fuel Storage Sites Major Industrials Aviation 2.Product Parameter Model Rated Working Pressure (Mpa) Working Pressure Range (Mpa) Rated Flow (L/S) Range (m) Elevation Horizontal Rotation PSY30-50ZB 1.0 1.0~1.6 30~50 ≥65 20°~85° 360°

Related Tags :
Oscillating Fire Monitor Fire Fightig Oscillating Monitor Portable Oscillating Monitor
read more
Stainless Steel Electric Remote Control Fire Water Monitor For Fire Fighting
Stainless Steel Electric Remote Control Fire Water Monitor For Fire Fighting The remote control fire monitor was designed as compact and reliable device. Horizontal and vertical positioning is accomplished by remotely controlled electric motors, equipped with insulated handles to facilitate safe manual override. The Fog/Jet nozzle can be adjusted between full jet and spray modes by a separate electric motor. Products Features 1) SS304 Stainless Steel construction; 2) Constant or Selectable nozzle ; 3) Vertical swing range: -90° to +90° ; 4) Horizontal rotation :360° ; 5) Electric control jetting Pattern: Straight stream,Fog; 6) Electric driver and control unit box are waterproof; 7) Power supply 12V/24V DC(optional),or 100-230 V AC Parameters: Model Number PSKDS 5 PSKDS 10 Flow Rate 5LPS / 300 LPM / 80GPM 10LPS/ 600 LPM / 160 GPM Working Pressure 8 Bar Max Reach 40 m 45 m Max Fog Angle 120° Max Range of Motion 360°horizontal rotation,-55°/+90°vertical elevate (adjustable) Turning Speed 24°/second rotation, 10°/second vertical Power Supply DC 24V Power Consumption 24V @ 7.5A Waterway Size 2"(50mm) 2"(50mm) Monitor Outlet 2"(50mm) Monitor Inlet Flange 2.5" ANSI 150# is standard,other size and standard available Material Monitor - SS304 stainless steel (SS316 upon request) Nozzle - Hard coated anodized aluminium alloy

Related Tags :
Electric Monitor Fire Water Monitor Remote Control Fire Monitor
read more
Remote Control Fire Fighting Water Cannon For Fire Vehicle
Remote Control Fire Fighting Water Cannon For Fire Vehicle The remote control water cannon was designed as compact and reliable device. Horizontal and vertical positioning is accomplished by remotely controlled electric motors, equipped with insulated handles to facilitate safe manual override. The Fog/Jet nozzle can be adjusted between full jet and spray modes by a separate electric motor. Products Features ● SS304 stainless steel construction. ● Automatic Nozzle supply a stable flow at different flow rate. ● Available controlled both byJoystick at site and RC transmitter wireless. ● Waterproof control system with locking connectors. ● Rotation range 360° ● Elevation range +90°, - 55° ● Power supply 12V/24V DC(optional),or 100-230 V AC Parameters: Model PSKD20-40 Flow Range 20-30-40LPS / 1200-1800-2400 LPM / 320GPM-630GPM, Selectable Working Pressure 6 bar~ 8 bar Max Reach @ Max Flow 60 meters Range of motion -90°~+90° Vert,360° Rotation Max fog angle 120° Turning speed 18 degrees/sec Material (body) 304L Stainless Steel(Standard) 316L Stainless Steel (optional) Material (Gear) Hardcoated anodizing aluminum Material (nozzle) Hardcoated anodizing aluminum Power supply DC 24V(Standard) DC 12V(Optional) AC100-230V (Optional) Power Consumption normal/Max 50W/150W Weight incl. nozzle appox 20kg Cable Length Monitor- CPU 5m Cable Length Joystick-CPU 5m standard/ other length available Pump requirement for minimum performance 40L/S@ 6 bar Pipe dimensions for installation 2-2.5 Inch Monitor Inlet 3” or 4" flange Monitor Outlet 2.5 inch NH Water way size 2.5 inch PACKAGE ● SS Monitor..............................1 set ● Monitor Nozzle.......................1 set ● Control Unit.............................1 pcs ● Joystick...................................1 pcs ● Cables......................................2 rolls (5m/roll) ● RC Transmitter........................1 pcs ● RC Receiver.............................1 pcs

Related Tags :
Water Cannon Fire Fighting Water Cannon Remote Control Water Cannon
read more
Electric Remote Control Fire Fighting Cannon For Fire Vehicle
Electric Remote Control Fire Fighting Cannon For Fire Vehicle The remote control water cannon was designed as compact and reliable device. Horizontal and vertical positioning is accomplished by remotely controlled electric motors, equipped with insulated handles to facilitate safe manual override. The Fog/Jet nozzle can be adjusted between full jet and spray modes by a separate electric motor. Products Features ● SS304 stainless steel construction. ● Automatic Nozzle supply a stable flow at different flow rate. ● Available controlled both byJoystick at site and RC transmitter wireless. ● Waterproof control system with locking connectors. ● Rotation range 360° ● Elevation range +90°, - 55° ● Power supply 12V/24V DC(optional),or 100-230 V AC Parameters: Model PSKD80 Flow Range 1800-4800 LPM Automatic Nozzle Working Pressure 6 bar~ 10 bar Max Reach @ Max Flow 80 meters @ 4800 LPM Range of motion Rotation range 360° Elevation range +90°, - 55° Max fog angle 120° Turning speed 18 degrees/sec Material (body) 304L Stainless Steel(Standard) 316L Stainless Steel (optional) Material (Gear) Hardcoated anodizing aluminum Material (nozzle) Hardcoated anodizing aluminum Power supply DC 24V(Standard) DC 12V(Optional) AC100-230V (Optional) Power Consumption normal/Max 50W/150W Weight incl. nozzle appox 29kg Cable Length Monitor- CPU 5m Cable Length Joystick-CPU 5m standard/ other length available Monitor Inlet 4 inch flange Monitor Outlet 2.5 inch NH Water way size 3 inch PACKAGE ● SS Monitor..............................1 set ● Monitor Nozzle.......................1 set ● Control Unit.............................1 pcs ● Joystick...................................1 pcs ● Cables......................................2 rolls (5m/roll) ● RC Transmitter........................1 pcs ● RC Receiver.............................1 pcs

Related Tags :
Fire Fighting Cannon RC Fire Cannon Cannon For Fire Vehicle
read more
Electric Remote Control Fire Water Cannon for Fire Fighting
Electric Remote Control Fire Fighting Cannon For Fire Vehicle The remote control water cannon was designed as compact and reliable device. Horizontal and vertical positioning is accomplished by remotely controlled electric motors, equipped with insulated handles to facilitate safe manual override. The Fog/Jet nozzle can be adjusted between full jet and spray modes by a separate electric motor. Products Features ● SS304 stainless steel construction. ● Automatic Nozzle supply a stable flow at different flow rate. ● Available controlled both byJoystick at site and RC transmitter wireless. ● Waterproof control system with locking connectors. ● Rotation range 360° ● Elevation range +85°, - 55° ●AC 380V power supply Parameters: Model PSKD150 PSKD180 PSKD180 Flow Range 150 L/S (2375 GPM) 180 L/S (2850 GPM) 200 L/S (3170 GPM) Working Pressure 10 bar 10 bar 10 bar Max Reach @ Max Flow 105 m 110 m 115 m Range of motion -50°~+85° Vert,360° Rotation Max fog angle 120° Turning speed 7 degrees/sec Material (body) 304L Stainless Steel standard （316L Stainless Steel is also available） Material (Gear) Hardcoated anodizing aluminum Material (nozzle) Hardcoated anodizing aluminum Power supply AC 380V Power Consumption normal/Max 50W/300W Weight incl. nozzle appox 55 KG Cable Length Monitor- CPU 5m Cable Length Joystick-CPU 5m standard/ other length available Pipe dimensions for installation 6 Inch Monitor Inlet 6” flange Monitor Outlet 4 inch (100mm) Water way size 4 inch PACKAGE ● SS Monitor..............................1 set ● Monitor Nozzle.......................1 set ● Control Unit.............................1 pcs ● Joystick...................................1 pcs ●Cables......................................2 rolls (5m/roll) ● RC Transmitter........................1 pcs ● RC Receiver.............................1 pcs

Related Tags :
Fire Water Cannon Water Cannon for Fire Fighting
read more
Wireless RC Fire Fighting Portable Monitor
Wireless RC Fire Fighting Portable Monitor 1.Product Introduction Wireless Remote Control Monitors are technologically advanced, electrically controlled portable monitors. They are suitable for the space where the fire field is far from the water source and the fire truck cannot enter and can be used to extinguish general solid material fires and oil fires, even be used to cool and cool oil tanks. Wireless remote control facilitates effective use of personnel and lowers the potential risk of injury from manual operations. Impresses with Hard coated anodized Aluminium alloy construction; Max. flow rate: 4800 LPM; Straight stream and fog spray; Controlled by RC transmitter wireless; Max. remote control distance 150 meters; Control pannel controlled at site;. Rotation range 360°; Elevation range +30°, +90° Movement recordable,and move automaticlly according to record. 2.Product Parameter Model PSKDY40ZB PSKDY60ZB PSKDY80ZB Flow rate 2400LPM 3600LPM 4800LPM Working pressure 10 Bar Max. jetting range 65 m 70 m 80 m Inlet size 2.5" NH 2*2.5" NH Outlet size 2.5" NH 2.5" NH 3"NH Horizontal Rotation 360° Vertical Swing +30°~+90° Automatic drainage when water pressure is less than 2 bar, water inside the monitor is drained automatically Spike Anti-skidding tungsten steel spike Safety valve available to close the valve when the monitor is inclined to protect fire fighting man away from damage Energy saving function The power will be shut off when there is no operation for 5 minutes

Related Tags :
Portable Monitor Fire Fighting Portable Monitor RC Fire Monitor
read more

first page
<< 11 12 13 14 15 16 17 18 >>
last page

A total of

pages