PVC Line Fire Hose
black-rubber-suction-pipe

  • Fire Hose Spray Nozzle
    Lance Variomatic UNI 45 PVC Rotating Fire Nozzle
    Lance Variomatic UNI 45 PVC Rotating Fire Nozzle   1.Product Introduction  This is a device used to supply water, provided with a nozzle with a suitable section and a unified connection. The lance can also be equipped with a valve that allows the full jet, the split jet and the closure.   2.Product Parameter  Material PVC Size 45mm  Working pressure 16 Bar Test pressure 24 Bar Discharge pattern Jet Spray   3. Product Feature Made of polyamide resin with rubber gaskets. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.
    read more
  • Fire Alarm Check Valve
    Wet Pipe System Fire Alarm Check Valve
    Wet Pipe System Fire Alarm Check Valve The alarm check valve is a water flow alarm device designed for vertical installation in the main supply to a wet pipe sprinkler system. When a flow of water from the system equals or exceeds that of a single sprinkler, the valve is to actuate a fire alarm. Model Norminal Diameter (mm) Working Pressure (MPa) Drive Time(s) ZSFZ-100 DN100 1.2~1.6 <15 ZSFZ-125 DN125 1.2~1.6 <15 ZSFZ-150 DN150 1.2~1.6 <15 ZSFZ-200 DN200 1.2~1.6 <15 Technical Data     Body Material Ductile Iron  Pipe Material Stainless Steel 304 Ball Valve Material Brass Fire Alarm Bell Material Stainless Steel 304 Retarder Material Stainless Steel 304 Pipe & Elbow Stainless Steel 304 Size (mm) DN100,DN125,DN150,DN200 Production Standard GB5135.5~2003
    read more
  • Hydrant Standpipe
    Europe Aluminum Fire Hydrant Standpipe
    Europe Aluminum Fire Hydrant Standpipe The standpipe for underground hydrant with one or two outlets with valve and Storz coupling C or B is used to take water from undergroundwater hydrants and supply water to a specific location. The single-spout attachment is used for underground hydrants with lower water flow. Specification Material: Aluminum Alloy Outlets: 2 way Valve Type: Screw Down Size: C2C, B2C, B2B   2.Parameters Model Inlet Outlet HS-C2C 2" (DN52) 2X2" STORZ C HS-B2C 3" (DN 80) 2X STORZ C HS-B2B 3" (DN 80) 2X STORZ B
    read more
  • Pump Suction Strainer
  • Suction Strainer
  • Foam Branchpipe
    Low Expansion Fire Foam Branchpipe
    Low Expansion Fire Foam Branchpipe Winner Foam Branchpipes have been designed for excellent performance with all foam concentrate types, offer longer throw and superior cooling compared to the Medium Expansion Foam Branchpipes. Main Features Aluminium Construction. Corrosion Resistant. Long Throw Capability. Lightweight. Easy to Service & Repair.   Specification   Product name Fire Foam Branchpipe Body Material Aluminum Alloy Foam Branchpipe Material SS304 Application Fire Fighting Emergency Rescue Color red Size Customized Size Working pressure 7 Bar Max Reach 24M Precipiation Time >=120S Coupling Instaneous, Storz, Others
    read more
  • Medium Expansion Foam Branchpipe
    Fire Fighting Medium Expansion Foam Branchpipe
    Fire Fighting Medium Expansion Foam Branchpipe The Winner Medium Expansion Foam Branchpipes have been designed for excellent performance with all foam concentrate types, and are capable of producing large quantities of foam in situations requiring an abundance of rapid foam cover with low water usage. All models offer a continuous stable medium expansion foam cover at low pressure right up to the maximum 6 bar. Compatible with the Variable In-Line Foam Inductor. Main Features 1.this foam nozzle is made of aluminium alloy with ss304 stainless steel;  2.a handle on the nozzle is convenient to carry on,  3.the connection standards are GOST; STORZ; INST,etc, 4.we have two types, one type with a valve to control the flow, another without vavle. If you need our help, please show us your demand and requirement. Specification   PQZ SERIES MEDIUM EXPANSION FOAM NOZZLE Model PQZB  Flow 4-8-16 LPS Working Pressure 6 bar Jetting Range 12 m Foam Expansion ≧30 times 50% drain time ≧30 seconds Inlet Size 1.5"; 2"; 2.5"  Coupling standard Storz, Instantaneous, GOST, NH,etc. Material Body:Hard Anodized Aluminum Valve: ABS Ball valve or Aluminum valve (optional)
    read more
  • Medium Expansion Foam Branchpipe
    Fire Fighting Medium Expansion Foam Branchpipe
    Fire Fighting Medium Expansion Foam Branchpipe The Winner Medium Expansion Foam Branchpipes have been designed for excellent performance with all foam concentrate types, and are capable of producing large quantities of foam in situations requiring an abundance of rapid foam cover with low water usage. All models offer a continuous stable medium expansion foam cover at low pressure right up to the maximum 6 bar. Compatible with the Variable In-Line Foam Inductor. Main Features 1.this foam nozzle is made of aluminium alloy with ss304 stainless steel;  2.a handle on the nozzle is convenient to carry on,  3.the connection standards are GOST; STORZ; INST,etc, 4.we have two types, one type with a valve to control the flow, another without vavle. If you need our help, please show us your demand and requirement. Specification   PQZ SERIES MEDIUM EXPANSION FOAM NOZZLE Model FN-C Flow 240/480/960 LPM Working Pressure 8 bar Jetting Range 12 m Foam Expansion ≧20 times Inlet Size 1.5"~3"  Coupling standard Storz, Instantaneous, GOST, NH,etc. Material Aluminum Alloy + SS304
    read more
  • Fire Hose Branch Pipe
    Brass Fire Hose Branch Pipe Fire Nozzle
    Brass Fire Hose Branch Pipe Fire Nozzle   1.Product introduction A branch pipe is a specific type of nozzle used by firefighters to douse the fire. Firefighters attach the branch pipe to the end of a fire hose pipe which can be adjusted by hand to shape, regulate and direct the water flow or fire safety agents.   Winner Branch Pipe Fire Nozzle has the option of a fog pattern or a straight stream. It can improve surface cooling compared to the full jet. It is usually made of brass or aluminum.   2.Product Parameter  Material Brass Size 1.5" / 2" / 2.5"  Working pressure 16 Bar Discharge pattern Stream / Spray   3.Products Features This branch pipe nozzles has a rotating element that sets the splash mode. When the fighters rotate it to a single side the outlet produces a splash. When turning to the end, the vent produces a water veil that protects the person handling the nozzle from the heat of the fire.
    read more
  • Suction Filter
  • Storz Hydrant Standpipe
    Aluminum Alloy Single Outlet Storz Fire Hydrant Standpipe
    Aluminum Alloy Single Outlet Storz Fire Hydrant Standpipe   Fire standpipe is basically a fire hydrant inside a building. Firefighters connect hoses to the standpipe to access water used to fight a building fire. Standpipes connect to a building's main water supply through a series of smaller pipes. It is a simple outdoor fire hydrant to used with underground fire hydrant.   Specification Standpipe shaft: Alu.alloy  Standpipe base&head: Alu.alloy Gasket: Rubber  Size: Inlet 2", Outlet 2" storz Working pressure: 10Bar

    Related Tags :

    Storz Hydrant Standpipe
    read more
  • Single Outlet Standpipe
    Single Outlet BS Aluminum Fire Hydrant Standpipe
    Single Outlet BS Aluminum Fire Hydrant Standpipe   Standpipes are available from Winner in a number of different types. They screw onto the outlet of the underground hydrant.   Single outlet fire hydrant standpipes come with a swivel connection to a shaft.The standpipe has a 2.5” female URT inlet and a twist release 2.5”female instantaneous outlet     2.Product Parameter Model No SHS02 Inlet 2.5”female URT Outlet 2.5”Female instantaneous with plastic cap and chain   3.Products Features A.Standpipe shaft: aluminium alloy to BS 1474 B.standpipe base & Head:Aluminium alloy to BS1490
    read more
  • Double Outlet Standpipe
    Aluminum Alloy Double Outlet BS Fire Hydrant Standpipe
    Aluminum Alloy Double Outlet BS Fire Hydrant Standpipe   1.Product Introduction  Standpipes are available in single or double outlet 65mm female instantaneous BS 336 and are connected to the shaft with a 65mm Male and Female Instantaneous (Double pull Release Type), or a swivel gland that will allow continuous rotation of the head through 360 deg.   The head with an instantaneous connection may be removed but the swivel type is an integral part of the standpipe. Double outlet standpipe is supplied with a single 65mm male blank plug.   2.Product Parameter  Model No SHS02 DHS Inlet 2.5" female URT 2.5" female BSRT Outlet 2.5" Female instantaneous with plastic cap and chain Double headed 21/2" Inst.Female with plastic cap and chain   3.Products Features A.Standpipe shaft:Aluminum Alloy to BS 1490 Copper Alloy to BS 2873 B.Standpipe Base and Head:Aluminum Alloy to BS 1490 Copper Alloy to BS 2873 C.Working Pressure:15 bar (217 psi) D.Test Pressure:22.5 bar (326 psi)

    Related Tags :

    Double Outlet Standpipe
    read more
  • Branch Pipe Nozzle
    Fire Protection Instaneous Jet Spray Fire Hose Branch Pipe Nozzle
    Fire Protection Instaneous Jet Spray Fire Hose Branch Pipe Nozzle   1. Product Introduction  Fire Protection Jet Spray Nozzles are widely demanded in fire brigades as the primary firefighting nozzle. It is offered in different metals as per the requirements. This long fire nozzle made of light weight aluminum alloy suits the general flow and operational needs.    2. Product Parameter  Material Aluminum Alloy Size 2.5 Inch Working pressure 16 Bar Discharge pattern Jet / Spray
    read more
  • Hose Bridge
    Dual Channel Rubber Hose Bridge
    Dual Channel Rubber Hose Bridge Our rubber hose bridges are constructed from durable, abrasion-resistant rubber. Specially designed connectors allow them to be secured together in place without twisting when driven over.   Features Dual channels keep hoses straight and withstand high pressure. Made from durable and abrasion-resistant thermoplastic rubber to withstand heavy loads. Embedded reflective yellow stripes for greater visibility. Multiple units are secured together with rubber dog bone connectors (2 connectors included with each ramp). Most suitable for high-traffic, industrial outdoor use.
    read more
  • Hose Ramp
    Double Channel Rubber Hose Ramp
    Double Channel Rubber Hose Ramp Rubber hose ramps and bridges are used to protect large hoses and cables from heavy vehicle drive overs. These industrial strength drive over pipe ramps are ideal for fire engines and other heavy equipment to cross over supply lines or master stream hoses.   Features Dual channels keep hoses straight and withstand high pressure. Made from durable and abrasion-resistant thermoplastic rubber to withstand heavy loads. Embedded reflective yellow stripes for greater visibility. Multiple units are secured together with rubber dog bone connectors (2 connectors included with each ramp). Most suitable for high-traffic, industrial outdoor use.
    read more

top

Online Now