Wholesale Best Adjust Flow Nozzle Products,Adjust Flow Nozzle Suppliers,manufacturers

Categories

Contact Us

86-0595-86801910 ivy.xiao7 info@winnerfirehose.com

Hot products

adjust-flow-nozzle

View :

Grid View List View

Bubble Cup Fire Foam Water Nozzle with Shut Off
Bubble Cup Fire Foam Water Nozzle with Shut Off The dual or single-gallonage Bubble Cup is a uniquely designed aspirating fog/foam nozzle specially created to be used with AFFF and Protein type foams for fire brigades and hazardous materials incidents or for structural and wildfire applications of Class A foaming agents. Capable of producing a conventional straight stream, wide protective fog pattern as well as aspirating foam, the Bubble Cup is a versatile nozzle that provides an extra measure of protection not found in any other aspirating foam nozzle. Main Features 1) Pattern Identification. 2) Hard Anodized Aluminum labels, Laser Engraved. 3) Simple to operate (1/4 turn from straight stream to fog) 4) Raised lug marks straight stream for limited visibility operations 5) Easy to service and repair. 6) Integrated foam attachment Product Parameter Weight (excl. coupling) 2.13 kgs Material Body Lightweight anodized aluminum Valve Aluminum Alloy Handle Nylon Bumper Rubber Working pressure 7 bar (100 psi) Max. pressure 16 bar (232 psi) Max. fog angle 130 ° Throw range 34 meter @ 7 bar Flow range (selectable) 115 LPM @7 bar 230 LPM @7 bar 360 LPM @7 bar 475 LPM @7 bar Flush Inlet size 1.5 inch, 2 inch, 2.5 inch (Optional). Connection coupling Storz,BS,NH,GOST,etc.

Related Tags :
Bubble Cup Nozzle Foam Water Nozzle Fire Foam Nozzle Water Nozzle Foam Nozzle
read more
CAFS Foam Smooth Bore Nozzle
CAFS Foam Smooth Bore Nozzle This very durable, pistol-grip ball shut-off features a whole unobstructed 1-1/2" ball opening. With the tip removed, this shut-off does not "strip" any bubbles from the CAFS stream. It, therefore, can produce the "shaving cream" type foam product. The 7/8" - 22mm smooth bore tip when installed slightly shapes the stream and holds back a bit of CAFS pressure to keep the hoseline stiffer and avoid kinking. This combo is a staple on ant CAFS truck. Main Features · Mainly for firefighting forces for various fires and different fire changes. · Made of strong lightweight aluminum alloy, anodized surface treatment. · 360-degree swivel,anti-hose knot · Easy to open and close the water flow by the fastball valve switch · Little recoil force. · Ergonomic, anti-slip polyurethane pistol grip. Product Parameter Weight (excl. coupling) 1.5 kgs Material Body Lightweight anodized aluminum Valve Aluminum Alloy Handle Nylon Working pressure 7 bar (100 psi) Flow rate 600 LPM @7 bar Medium Water / Foam Inlet size 1.5 inch, 2 inch, 2.5 inch (Optional). Connection coupling Storz,BS,NH,GOST,etc.

Related Tags :
Smooth Bore Nozzle CAFS Nozzle Fire Nozzle CAFS Foam Nozzle
read more
1 Inch Compact Wildland Forest Fire Nozzle Gun
1 Inch Compact Wildland Forest Fire Nozzle Gun Winner Forest Fire Nozzle is an economical, lightweight, and dependable nozzle. Their rugged construction is compatible with the use of freshwater as well as firefighting foam concentrate. Other important operating features include: * Quick-acting pattern control from straight stream to wide fog * Spinning stainless steel teeth; * Stainless stainless mesh filter; * Easily flushable while flowing to clear trapped debris; * Quick-change fire hose coupling; Forest Fire Nozzle has a selectable flow range at 7 bar of 15, 30, 45, and 60 litres per minute to meet the individual needs of the firefighter at any given time but alternative flow rates are available. Features: Model TN - D Flow rate 50-100-150-235 LPM Working pressure 6 Bar Inlet size 1" Coupling srandard QC, STORZ, NH (Optional) Material Anodized aluminium alloy

Related Tags :
Fire Nozzle Gun Forest Fire Nozzle Wildland Fire Nozzle Compact Fire Nozzle Turbojet Fire Nozzle Fire Hose Nozzle
read more
Branchpipe Low Expansion Foam Making Nozzle
Branchpipe Low Expansion Foam Making Nozzle Winner Foam Making Nozzles have been designed for excellent performance with all foam concentrate types, offer longer throw and superior cooling compared to the Medium Expansion Foam Branchpipes. Main Features Brass Construction. Corrosion Resistant. Long Throw Capability. Lightweight. Easy to Service & Repair. Specification Product name Fire Making Nozzles Body Material Brass Foam Branchpipe Material SS304 Application Fire Fighting Emergency Rescue Color Silver or Blue Size Customized Size Working pressure 7 Bar Max Reach 24M Precipiation Time >=120S Coupling NH, Gost, Storz, Others

Related Tags :
Foam Making Nozzle Low Expansion Foam Nozzle Branchpipe Foam Nozzle Foam Branchpipe
read more
Constant Stream Twist Spray Forestry Bush Nozzle Tip
Constant Stream Twist Spray Forestry Bush Nozzle Tip Winner Forestry Bush Nozzles are specially designed with a 1/4" straight stream hole forming a solid jet, shapes and directs water for fire application from a safe distance. When you twist the nozzle, the flow turns into spraying with steaming in the middle. It is made of high-quality aluminum alloy. It is one of the important and indispensable water jetting tools for fire fighting equipment. Technical Parameters: Material Aluminum Alloy Size 1.5" Working pressure 16 Bar Discharge pattern Constant Stream + Twist Spray Couplings Storz, Machino, Instaneous, NH, Gost, Nakajima etc.

Related Tags :
Forestry Bush Nozzle Forestry Nozzle Tip Bush Nozzle Tip
read more
Forestry Fire Fighting Quick Connect Adjust Flow Multi Aperture Nozzle
Forestry Fire Fighting Quick Connect Adjust Flow Multi Aperture Nozzle This durable nozzle is designed to withstand the high pressure requested by forestry applications. The diamond knurl grip provides easy adjustments. Four spray sizes available: 1/8”, 3/16”, 1/4”, 5/16” (3, 5, 6, 8 mm). The nozzle couples to all 1 1⁄2” quarter-turn adapters. Technical Parameters: Material Aluminum Alloy Size 1.5" Working pressure 16 Bar Flow Selectable Couplings QC.

Related Tags :
Multi Aperture Nozzle Forestry Fire Nozzle Adjust Flow Nozzle
read more
1.5 Inch Round Bumper Jet Spray Fire Fighting Brass Fog Nozzle
1.5 Inch Round Bumper Jet Spray Fire Fighting Brass Fog Nozzle 1. Product Introduction This is a nozzle suitable for connecting with a fire hydrant hose/rack hose. It is a device used to supply water, provided with an adaptor for connection, and it sprays a dense, full stream of water. It is used for a variety of washdown or standby applications. 2. Product Parameter Material Brass Size 1.5 inch Max working pressure 100 psi Flow rate 80 GPM Discharge pattern Capable of complete shutoff, straight stream or any degree of conical fog 3. Product Feature EXACT SIZE - 1-1/2" (38 mm) adjustable fog nozzle. Female 1-1/2" NH/NST will only connect to a male 1-1/2" NH/NST. If you need a 1-1/2" NPSH nozzle, this 1-1/2" NH/NST nozzle will be too big for your hose. Please check the thread of your hose before ordering. MULTIPURPOSE APPLICATION - Recommended for fire hose and fire hose racks for lined or unlined fire hoses. This fire nozzle is for attaching to a fire hose and for extinguishing fires. This spray nozzle is for firefighter fireman stations and also could be for greenhouse applications, dust suppression, and evaporate cooling. PREMIUM MATERIAL - Brass housing and brass stem, brass material for resistance to high temperature and impact, and for corrosion resistance. Excellent watering equipment. 1-1/2" cast brass adjustable fog nozzle EASY TO CONTROL - By rotating to control on and off and adjust spray size, adjusts from straight stream to fog for multipurpose use. Industrial constant flow fog nozzle. Approximate gallons per minute (GPM) - 80. Maximum 100 psi pressure (water only). Provides consistent volume at any spray angle. Capable of complete shutoff, straight stream or any degree of conical fog. 100% SATISFACTION SERVICE - We have a professional fire nozzles development team. If you have any questions about compatibility or any dissatisfaction, please feel free to contact us and we will help you solve it perfectly

Related Tags :
Brass Fog Nozzle Jet Spray Brass Nozzle Fire Fighting Nozzle
read more
Forestry Fire Fighting Pistol Grip Low Expansion Handline Foam Nozzle
Forestry Fire Fighting Pistol Grip Low Expansion Handline Foam Nozzle The PQ2/0.7 series low-multiplication air foam gun can generate and spray air foam to extinguish Class A solid fires and Class B liquid fires, especially in medium-sized oil fires. It is a relatively light handheld firefighting equipment. When the mixture of water and 1% Class A foam fire extinguishing agent passes through the nozzle, the gun body forms a negative pressure under the action of the water flow, so that the negative pressure formed by the shooting speed of the mixed liquid inhales a large amount of air to mix with the mixed liquid. When the air foam is mixed and expanded through the gun barrel, the air foam is sprayed out of the gun barrel after reaching equilibrium, and then the air foam sprayed through the gun barrel is used for fire extinguishing operations. This product is developed for 1% Class A foam fire extinguishing agent, and the unique negative pressure suction structure is suitable for use with 1% Class A or low-multiplication foam fire extinguishing agent. Main Features · Mainly for firefighting forces for various fires and different fire changes. · Made of strong lightweight aluminum alloy, anodized surface treatment. · 360-degree swivel,anti-hose knot · Easy to open and close the water flow by the fastball valve switch · Little recoil force. · Ergonomic, anti-slip polyurethane pistol grip. Product Parameter Weight (excl. coupling) 1.5 kgs Material Body Lightweight anodized aluminum Valve Aluminum Alloy Handle Nylon Working pressure 7 bar (100 psi) Flow rate 120 LPM @7 bar Medium Water Foam Mixture Expansion Rate ≥ 9 times Inlet size 1.5 inch Connection coupling Storz,BS,NH,GOST,etc.

Related Tags :
Handline Foam Nozzle Pistol Grip Foam Nozzle Forestry Foam Nozzle
read more
Fire Fighter Handline High Pressure Nozzle with Trigger Shutoff
Fire Fighter Handline High Pressure Nozzle with Trigger Shutoff High pressure handline fire nozzle is designed to produce powerful stream at higher pressure. It features ergonomic design trigger shutoff which automatically shuts off flow when released. Main Features For high pressure application of up to 700psi (48 bar) High quality, harder hitting, straight stream performance. Customized flow settings available upon request. Compatible with foam tube for enhanced foam application. Additional pistol grip for excellent control at high working pressure. Product Parameter Flow @ 100 psi (7 bar) Material Inlet Nozzle type Shutoff configuration GPM LPM AL 1" NH Selectable gallonage Trigger + pistol grip 5-10-24-40 19-37-90-150

Related Tags :
Handline High Pressure Nozzle High Pressure Nozzle with Trigger Shutoff High Pressure Fire Nozzle Fire Nozzle with Trigger Shutoff Fire Fighter Nozzle Fire Fighter Handline Nozzle
read more

first page
<< 1 2 3 4
last page

A total of

pages