1 2 Fire Hose

Categories

Contact Us

86-0595-86801910 ivy.xiao7 info@winnerfirehose.com

Hot products

1-2-fire-hose

View :

Grid View List View

Brass John Morris Fire Hose Couplings

Related Tags :
Brass John Morris Fire Hose Coupling Brass UK Fire Hose Coupling Brass smoothy British Fire Hose Fitting Brass BS336 standard fire hose coupling Brass John morris coupling
read more
DN15 Foam Nozzle Fire
DN15 Foam Nozzle Fire: Foam/water sprinkler systems are more economical than a water-only system, when evaluated for the same risk. They provide for actual extinguishment of the fire and a lower water demand. The conversion assists in the reductionof property loss, loss of life and in many cases the reduction of insurance rates. In most instances, fires cause more than structural and inventory damages. Many manufacturing and storage facilities have various flammable products that are protected by water sprinkler systems alone. The water sprinkler system may extinguish the fire; however, this type system has the two potential problems. If the water only system is not capable of quick extinguishment, the product containers can erupt and spill. Also it typically requires a great deal of water to extinguish a flammable liquid that is miscible in water or in many cases, the flammable liquid floats on the water and then the water becomes the vehicle that spreads the fire. Both the large amounts of water and the flammable liquids are normally washed into the local drain systems which can contaminate the water supplies and aquifers. Along with the financial loss of the manufacturing/storage facilities and products, there is the expense of contamination cleanup. Foam systems can facilitate in quick extinguishment and water reduction. In a single year, the National Fire Protection Association documented fires that involved flammable liquids with direct losses of over $1 billion. The extended losses includingthe close of businesses, cost of environmental cleanup and increased insurance costs are inconceivable. Techincal Data: Sprinkler Body Material Brass Net Material SS304 Deflector Material Brass Installation Pendent Thread Connection 1/2" BSP Surface Finishing Brass Chromed Application Fire Protection Media Water ,Foam K Factor 3.0 Max Working Pressure 175 psi (12,1 bar) Size(mm) 15(1/2) 20(3/4) 25(1") Working Pressure(Mpa) 0.4 0.4 0.4 Flow Rate(L/S) 50 70 90 Foaming Level ≥5 ≥5 ≥5 25% dessection 120s 120s 120s K 25 35 45 Material Brass Brass Brass

Related Tags :
Foam Nozzle Fire Fire Nozzle Foam Fire Foam Nozzle
read more
Aluminum Gost 2 inch Fire Hose Nozzle
Aluminum Gost 2 inch Fire Hose Nozzle 1.Product introduction Gost fire hose nozzle is a fire extinguishing device connected to a hose to spray a dense, full stream of water. It has the advantages of long range and large amount of water. 2.Product Parameter Material Aluminum Size 51mm / 66mm Working pressure 16 Bar Test pressure 24 Bar Discharge pattern Solid uniform Jet Pattern

Related Tags :
Fire Hose Nozzle 2 inch Fire Hose Nozzle Aluminum Gost Fire Hose Nozzle
read more
2.5 inch John Morris Instaneous Fire Fighting Branch Pipe
2.5 inch John Morris Instaneous Fire Fighting Branch Pipe 1.Product Description Branch pipe,its inlet connection is 21/2” male instantaneous and outlet is Solid Jet nozzle.Material of construction maybe copper alloy or aluminum alloy. 2.Product Parameter Material Brass Aluminum Size 65mm Working pressure 16 Bar Test pressure 24 Bar Discharge pattern Solid uniform Jet Pattern 3.Products Features A.Its operating pressure is 150 PSI Max and is naturally polished,It is a basic fire fighting nozzle commonly used by most fire Brigades.These smooth bore tips creates concentrated jet pattern of water flow with maximun reach. B.This nozzle is available with two orifice sizes:12mm and 19mm C.Application:hydrant system,wet or dry riser system

Related Tags :
Fire Fighting Branch Pipe Instaneous Fire Fighting Branch Pipe 2.5 inch Fire Fighting Branch Pipe
read more
UNI 45 Fire Fighting Spray Nozzle
UNI 45 Fire Fighting Spray Nozzle 1.Product Introduction UNI 45 fire fighting spray nozzle is a fire extinguishing device that is connected to a hose to spray a dense, full stream of water. It has the advantages of long range and large amount of water. 2.Product Parameter Material Aluminum Size 45mm Working pressure 16 Bar Test pressure 24 Bar Discharge pattern Jet Spray

Related Tags :
Fire Fighting Nozzle Fire Spray Nozzle UNI 45 Fire Nozzle
read more
Lancia Frazionatrice UNI 45 Plastic Fire Hose Spray Nozzle
UNI 45 Plastic Fire Hose Spray Nozzle 1.Product Introduction UNI 45 plastic fire spray nozzle is a fire extinguishing device that is connected to a hose to spray a dense, full stream of water. It has the advantages of long range and large amount of water. 2.Product Parameter Material Aluminum & Plastic Size 45mm Working pressure 16 Bar Test pressure 24 Bar Discharge pattern Jet Spray

Related Tags :
Fire Hose Spray Nozzle Plastic Fire Hose Spray Nozzle UNI 45 Fire Hose Spray Nozzle
read more
Lance Variomatic UNI 45 PVC Rotating Fire Nozzle
Lance Variomatic UNI 45 PVC Rotating Fire Nozzle 1.Product Introduction This is a device used to supply water, provided with a nozzle with a suitable section and a unified connection. The lance can also be equipped with a valve that allows the full jet, the split jet and the closure. 2.Product Parameter Material PVC Size 45mm Working pressure 16 Bar Test pressure 24 Bar Discharge pattern Jet Spray 3. Product Feature Made of polyamide resin with rubber gaskets. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.

Related Tags :
PVC Rotating Fire Nozzle pvc spray nozzle branch pipe fire nozzle
read more
115 - 475 LPM Adjustable Spray Gun Type Fire Nozzle
115 - 475 LPM Adjustable Spray Gun Type Fire Nozzle Winner WFSN-475 gun type fire nozzle is a constant gallonage nozzle(flow remains the same in all patterns), with multiple flow settings for operator flow control.The WFSN-475 has four flow classes,115-230-360-475 LPS, and it is available both for straight stream,fog spray and flush without shutting down. Main Features 1) Pattern Identification. 2) Hard Anodized Aluminum labels,Laser Engraved. 3) Simple to operate (1/4 turn from straight stream to fog) 4) Raised lug marks straight stream for limited visibility operations 5) Easy to service and repair. 6) CCC certificate. 7) Compatible with Quick Attach Foam Tube Product Parameter Weight (excl.coupling) 1.6 kgs Material Body Lightweight anodized aluminum Valve Aluminum Alloy Handle Dupont Nylon Bumper Rubber Working pressure 7 bar (100 psi) Max. pressure 16 bar (232 psi) Max. fog angle 130 ° Throw range 40 meter @ 7 bar Flow range (selectable) 115 LPS @7 bar 230 LPS @7 bar 360 LPS @7 bar 475 LPS @7 bar Flush Inlet size 1.5 inch, 2 inch, 2.5 inch (Optional). Connection coupling Storz,BS,NH,GOST,etc.

Related Tags :
Gun Type Fire Nozzle fire hose nozzle fire fighting spray nozzles pistol grip fire nozzle Gun Fire Nozzle
read more
Turbojet 50 - 235 LPM Fire Hose Nozzle
50 - 235 LPM Spray Jet Fire Hose Nozzle Winner WFSN-235 gun type fire nozzle is a constant gallonage nozzle(flow remains the same in all patterns), with multiple flow settings for operator flow control.The WFSN-230 has four flow classes,50-100-150-235 LPM, and it is available both for straight stream,fog spray and flush without shutting down. Main Features 1) Pattern Identification. 2) Anodized Aluminum labels,Laser Engraved. 3) Simple to operate (1/4 turn from straight stream to fog) 4) Raised lug marks straight stream for limited visibility operations 5) Easy to service and repair Product Parameter Model Number TN - C Weight 1.4kg Fire nozzle body Material Anodized Aluminum Fire Nozzle Handler Material Horseshoe (Injection Molded Nylon black Handle) Fire Nozzle Bumper Material Rubber Swivel Inlet 1.5" ( 40mm ) recommended Coupling Storz/NH/BSP/Russian type, etc. Valve Type Aluminum / SS Flow Control Method 50-100-150-235 L/min Working Pressure 6 Bar Max Reach @ Max Flow 28 m Max fog angle 130 degree Fire Nozzle Type Pistol Grip

Related Tags :
Turbojet Turbo Nozzle Turbojet Nozzle Turbojet Fire Hose Nozzle Turbojet Fire Nozzle
read more
200 - 760 LPM Turbo Jet Fire Hose Nozzle
200 - 760 LPM Turbo Jet Fire Hose Nozzle Winner turbo jet fire nozzle is a constant flow nozzle(flow remains constant and stable in all patterns). It can remain working when you change from different modes straight stream, fog spray or flush without shutting down. Main Features 1) Pattern Identification. 2) Hard Anodized Aluminum labels,Laser Engraved. 3) Simple to operate (1/4 turn from straight stream to fog) 4) Raised lug marks straight stream for limited visibility operations 5) Easy to service and repair. 6) CCC certificate. 7) Compatible with Quick Attach Foam Tube Product Parameter Weight (excl.coupling) 2.2 kgs Material Body Lightweight hard anodized aluminum Valve ABS Handle Horseshoe (Injection Molded Nylon red Handle) Bumper Rubber Working pressure 7 bar (100 psi) Max. pressure 25 bar (360 psi) Max. fog angle 130 ° Throw range 52 meter @ 7 bar Flow range 200 - 760 LPM (Automatic) Flush Inlet Size 1.5" (40 mm) Inlet coupling style Storz,INST.,NH,GOST,etc.

Related Tags :
Turbo Jet Fire Hose Nozzle nozzle fire fire spray nozzle
read more
360 - 950LPM Adjustable Flow Handline Pistol Grip Fire Nozzle
360 - 950LPM Adjustable Flow Handline Pistol Grip Fire Nozzle Winner WFSN-950 pistol grip fire nozzle is a constant gallonage nozzle(flow remains the same in all patterns), with multiple flow settings for operator flow control.The WFSN-950 has four flow classes,360-475-570-760-950 LPM, and it is available both for straight stream,fog spray and flush without shutting down. Main Features 1) Pattern Identification. 2) Anodized Aluminum labels,Laser Engraved. 3) Simple to operate (1/4 turn from straight stream to fog) 4) Raised lug marks straight stream for limited visibility operations 5) Easy to service and repair. 6) CCC certificate. 7) Compatible with Quick Attach Foam Tube Product Parameter Model Number QLD6.0/15III-C Weight 2.7 kg Operation Type Handline Spray Pattern Jet and fog Spray Swivel Inlet 2.5" ( 65mm ) recommended Coupling Storz/NH/BSP/Russian type, etc. Length 260mm Flow Control Method 360-475-570-760-950 L/min Working Pressure 7 Bar Max Reach @ Max Flow 37 m Max fog angle 130 degree Nozzle Type Selectable Flow Nozzle Media Water Application Fire fighting, Industrial

Related Tags :
Pistol Grip Fire Nozzle Handline Pistol Grip Fire Nozzle Adjustable Flow Fire Nozzle
read more
400 - 2000LPM Fireman Holds and Adjust Fire Water Nozzle
400 - 2000LPM Fireman Holds and Adjust Fire Water Nozzle Winner WFSN-2000 pistol grip fire nozzle is a constant gallonage nozzle(flow remains the same in all patterns), with multiple flow settings for operator flow control.The WFSN-950 has four flow classes,400-2000 LPS, and it is available both for straight stream,fog spray and flush without shutting down. Main Features 1) Pattern Identification. 2) Hard Anodized Aluminum labels,Laser Engraved. 3) Simple to operate (1/4 turn from straight stream to fog) 4) Raised lug marks straight stream for limited visibility operations 5) Easy to service and repair. 6) CCC certificate. 7) Compatible with Quick Attach Foam Tube Product Parameter Swivel Inlet 1.5" ( 40mm ) recommended Operation Type Pistol Grip Type Nozzle Type Automatic Nozzle,constant pressure, variable flow, constant gallonage, flow does not change with pattern Inlet Size 1.5 inch ,2 inch ,2.5 inch Coupling Storz/NH/BSP/Russian type, etc. Flow Rate 400-2000 L/min automatic Spray Pattern Jet and fog spray Media Water Application Fire fighting,fire hose,firefighter,fire hydrant Working Pressure 7 Bar Max Reach@Max Flow 60 Meters Max Fog Angle 120 degree

Related Tags :
Fire Water Nozzle Adjust Fire Water Nozzle water spray nozzles
read more
High Quality 2 Ways with Valves Wet Barrel Pillar Hydrant
High Quality 2 Ways with Valves Wet Barrel Pillar Hydrant British wet hydrant is used in warm areas with water in the barrel always. The outlets are individually controlled and the mechanical parts are easy to access above ground. Specification Body material: Cast Iron to BS 1452 Inlet : 4" Table T BS 10 Flange Outlet: Copper Alloy 2x2.5" Control Valve with Female BS Inst. Outlet Test pressure: 30bar(435 psi) Working pressure: 20bar(290 psi) Finishing: Red Epoxy coated 2.Parameters Body Ductile iron as BS 1452 O-ring NBR Valve Assembly Brass / Bronze Hose Outlet 2 x 2.5“ BS336

Related Tags :
Pillar Hydrant Wet Barrel Pillar Hydrant Wet Barrel Pillar Fire Hydrant
read more
2.5'' Brass Thread Inlet Oblique Fire Hydrant Landing Valve
2.5'' Brass Thread Inlet Oblique Fire Hydrant Landing Valve Landing valves are suitable for installation on wet risers in a building for fire fighting purposes, permanently charged with water from a pressurized supply. The landing valves are oblique type with threaded inlet and are manufactured with delivery hose connection and blank cap. The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bar. Technical Data Valve Type Oblique, Threaded Inlet Pressure Rating Low Pressure Valve Nominal Size DN 2 1/2" Working Pressure 15 Bar Maximum Test Pressure Valve Seat Test at 16.5 Bar • Body Test at 22.5 Bar Water Flow Rate 8.5 L/S @ 4 Bar Outlet Pressure

Related Tags :
Oblique landing valve Fire Hydrant Valve 2.5inch landing valve
read more
2.5 Inch Flange Inlet Oblique Fire hydrant Landing Valve
2.5 Inch Flange Inlet Oblique Fire hydrant Landing Valve Oblique landing valves are suitable for installation on wet risers in a building for fire fighting purposes with permanently charged water from a pressurised supply. The landing valves are oblique type with flanged inlet and are manufactured to comply to BS 5041 Part 1 standard with delivery hose connection and blank cap complying with BS 336:2010 standard. The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bar. Product Parameter Code No. WFLV - F25 Body Material Copper Alloy Inlet 2.5”BS4504 Outlet 2.5”BS 336 Female coupling with plastic cap & chain Pressure Rating Low Pressure Valve Test pressure Valve Seat Test at 16.5 Bar • Body Test at 22.5 Bar Water Flow Rate 8.5 L/S @ 4 Bar Outlet Pressure Products Features Body material made of copper alloy to EN 1982 Hand wheel material made of grey cast iron to BS EN 1561 Blank cap material made of copper alloy to EN 1982 Possible to replace the gland seal when under pressure with the valve fully closed Disc facing rubber is of replaceable type Valves are provided with a strap and pad lock so that the hand wheel can be secured to counter unauthorized use The hand wheel is BLACK painted and body to RED

Related Tags :
fire hydrant landing valve 2.5 fire hydrant valve Flange Oblique Landing Valve
read more
2 Way Breeching Inlet for Riser
2 Way Breeching Inlet for Riser Two Way Inlet Breeching Valve comply fully with the requirements of BS5041 Part 3. The bodies are manufactured from cast iron or spheroildal graphite iron and all fittings are in gunmetal making these inlet breechings extremely durable. The 2-way dry riser inlet breeching has 2 x 2½” Instantaneous male non return valve inlets and a 4″ PN16 or Table D outlet flange. The 4-way inlet breeching has 4 x 2½” Instantaneous male non return valve inlets and a 6″ PN16 or Table D outlet flange. The 2-way and 4-way also comes complete with 1″ drain valve. Product Parameter Code No. WFBL- 2 Inlet 2 Nos. 2-1/2” Male Instantaneous Connector Complying to BS 336 Outlet 100mm Flange outlet Working Pressure 16 Bar Test pressure Hydrostatically tested to 24,Non-return valve tested to 22.5 bar Flange size BS 4504 / BS10D TABLE D Products Features Manufactured in accordance with BS 5041 : Part 3 : 1975. High quality casting finishes. 25 mm drain valve with blanking cap and chain. Vertical or horizontal mounting.

Related Tags :
2 Way Breeching Inlet 2 Way Breeching Inlet for Riser Fire Breeching Inlet
read more

first page
<< 1 2 3 4 5 6 7 8 9 10 >>
last page

A total of

pages