Wholesale Best Handline High Pressure Nozzle Products,Handline High Pressure Nozzle Suppliers,manufacturers

Categories

Contact Us

86-0595-86801910 ivy.xiao7 info@winnerfirehose.com

Hot products

handline-high-pressure-nozzle

View :

Grid View List View

Water Pressure Release Valve for Fire Fighting
Water Pressure Release Valve for Fire Fighting The valve consists of the main valve and outside installed control pilot valve, mainly installed in the bypass of the protected water supply system in the building, guarantee the pressure of the main valve upstream water supply zone, when the pressure in the water supply pipe exceeds the pressure set by the pressure releasing valve, the pressure releasing valve is switched on to prevent pipeline and equipment from damage by pressure exceeding. This valve is mainly used in pressure releasing of the fire test circulation system in high-rise buildings, is the upgrade replacement product of the spring safety valve. Features: 1)Reasonable and novel structure, reasonable use of the hydraulic principle to control. 2)Long service life. 3)Valve clack quick opening and slow closure, no water hammer impacting. 4)High sensitivity, safe pressure discharge. 5)Stable operation, no noise.

Related Tags :
Pressure Release Valve Water Pressure Release Valve Pressure Release Valve for Fire Fighting
read more
Water Pressure Relief Valve for Fire Fighting
Water Pressure Relief Valve for Fire Fighting This valve is used for the high building fore-fighting system,To prevent the pipeline and equipment damage due to overpressure. The body uses full passage streamline design, of a small fluid resistance and a heavy flow. This valve can be used as either a pressure releasing or holding valve. when used as the former, it can release the pressure surpassing the safe value set with the pilot valve and keep the pressure inside of the pipeline below the safe value to prevent system against danger due to an excessively high water pressure;while used as the latter,it can keep the upstream water supply pressure of the main valve over some set value,this is because water supply to the downstream can not be done,unless the upstream is higher than the set value,in order to make sure of he upstream water supply pressure of the main valve.

Related Tags :
Pressure Relief Valve Water Pressure Relief Valve Pressure Relief Valve for Fire Fighting
read more
High Velocity Water Spray Nozzle For Fire Fighting

Related Tags :
High Velocity Water Spray Nozzle Water Spray Nozzle Water Spray Nozzle For Fire Fighting Spray Nozzle For Fire Fighting
read more
MV Type Fire Sprinkler Medium Velocity Spray Nozzles

Related Tags :
Medium Velocity Spray Nozzles MV Type Fire Sprinkler
read more
Water Curtain Fire Fighting Nozzle

Related Tags :
Water Curtain Fire Fighting Nozzle Water Curtain Nozzle Fire Fighting Nozzle
read more
DN45 Brass Fire Valve Barcelona with Pressure Gauge
DN45 Brass Fire Valve Barcelona with Pressure Gauge Fire Valve is a connector to fire water supply with the valve interface, used for factory, warehouse, high-rise buildings, public buildings and ship, normally installed in fire hydrant box, with fire hoses and water gun or wait for equipment supporting the fire equipment . Type: Fire Valve Barcelona Model: WFHV - B45 Material: Brass Inlet interface: 45 mm / 1.5 inch Rated working pressure: 1.6 Mpa For water and foam mixed liquid only Standard: Manufacture and certified to DIN 14461 Name Indoor fire hydrant Body Material Brass Valve Rod Material Brass Size DN45 Packing Carton with pallet Delivery time 15-30 days OEM Avaliable Original Made In China

Related Tags :
Brass Fire Valve DN45 Fire Valve Fire Valve Barcelona Fire Valve with Pressure Gauge
read more
2 inch 52mm Plastic Straight Fire Nozzle
2 inch 52mm Plastic Straight Fire Nozzle 1.Product Introduction Straight fire nozzle,its inlet connection is 2” storz and outlet is straight stream nozzle.Material of construction is aluminum alloy and plastic. 2.Product Parameter Material Aluminum & Plastic Size 25mm / 50mm / 65mm Working pressure 8 Bar Discharge pattern Solid uniform Jet Pattern 3.Products Features Its operating pressure is 116 PSI Max and is naturally polished,It is a basic fire fighting nozzle commonly used by most fire Brigades.These smooth bore tips creates concentrated jet pattern of water flow with maximun reach.

Related Tags :
Straight Fire Nozzle Plastic Straight Fire Nozzle 2 inch Fire Nozzle
read more
Attic Pistol Grip Attack Piercing Spike Fog Fire Nozzle Gun
Attic Pistol Grip Attack Piercing Spike Fog Fire Nozzle Gun Fog Spikes delivering fine water sprays through a variety of construction mediums without the need for firefighter entry. Integration with existing fire appliance pumps ensures complete compatibility of use - there are no ‘special requirements’ needed to existing equipment to use the Fog Spikes. The Fog Spikes are specifically designed to allow operatives to attack and improve pre-entry compartment fire conditions by rapidly reducing internal temperatures significantly reducing risk to firefighters and greatly limiting water damage. Main Features * Designed to efficiently extinguish fire in confined and hard-to- reach areas, such as storage facilities, attics and mobile homes. * Quick penetration of glass, crevice in masonry walls, concrete blocks, metal sheets and plywood * Provides rapid attack on hidden trouble spots * Impinging jets for a dense fog pattern Applications Roof, Loft and Basement Fires Thatch Fires Room / Compartment Fires Shop Fires Shed / Warehouse Fires Car & Lorry Fires Skip & Waste Bin Fires Peat Fires Brush / Forest Fires Shipping Container Fires Cabin Fires Aircraft Fires Waste Recycling Pile Fires Mud / Silt Aeration Specification Model Number WFN - P600 Material Anodized Aluminum Alloy Inlet Size 1.5"(40mm) , 2" ( 50mm ) , 2.5"(65mm) Coupling Storz/NH/BSP/Russian type, etc. Flow Rate 600LPM Working Pressure 7 Bar

Related Tags :
Spike Fog Nozzle Fire Nozzle Gun Attack Spike Fog Nozzle Fog Nozzle Pistol Grip Nozzle Piercing Nozzle
read more
Plastic Fire Hydrant Hose Nozzle
Plastic Fire Hydrant Hose Nozzle 1.Product Introduction This is a nozzle suit to connect with fire hydrant hose / rack hose. It is a device used to supply water, provided with a adaptor for connection to spray a dense, full stream of water. 2.Product Parameter Material Plastic Size 1.5 inch Max working pressure 100 psi Flow rate 80 GPM Discharge pattern Capable of complete shutoff, straight stream or any degree of conical fog 3. Product Feature Made of polyamide resin with rubber gaskets. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.

Related Tags :
Plastic Fire Nozzle Hydrant Hose Nozzle Fire Hose Nozzle
read more
BS Quick Connect Spray Jet Fire Hose Diffuser Nozzle
BS Quick Connect Spray Jet Fire Hose Diffuser Nozzle 1.Product Introduction Fire Hose Diffuser Nozzles are widely demanded in fire brigades as the basic firefighting nozzle. It is offered in in different metals as per the requirements. The short one can easily fit with a choice of nozzles to suit the flow and operational requirement. 2.Product Parameter Material Aluminum Size 2.5 Inch Working pressure 16 Bar Discharge pattern Jet Spray 3. Product Feature Made of aluminum alloy material with rubber bumper. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.

Related Tags :
Fire Hose Diffuser Spray Jet Fire Hose Nozzle Hose Diffuser Nozzle
read more
1.5 Inch Brass Fire Hydrant Hose Nozzle
1.5 Inch Brass Fire Hydrant Hose Nozzle 1.Product Introduction This is a nozzle suit to connect with fire hydrant hose / rack hose. It is a device used to supply water, provided with a adaptor for connection to spray a dense, full stream of water. 2.Product Parameter Material brass Size 1.5 inch Max working pressure 100 psi Discharge pattern Capable of complete shutoff, straight stream or any degree of conical fog 3. Product Feature Made of brass with rubber gaskets. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.

Related Tags :
Fire Hydrant Hose Nozzle 1.5 inch Fire Nozzle Brass Fire Hose Nozzle
read more
Spray Jet Brass Fire Fighting Hose Nozzle
Spray Jet Brass Fire Fighting Hose Nozzle 1.Product Introduction This is a nozzle suit to connect with fire hydrant hose / rack hose. It is a device used to supply water, provided with a adaptor for connection to spray a dense, full stream of water. 2.Product Parameter Material Brass Size 1.5 inch Max working pressure 100 psi Flow rate 80 GPM Discharge pattern Capable of complete shutoff, straight stream or any degree of conical fog 3. Product Feature Made of solid brass. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.

Related Tags :
Fire Fighting Hose Nozzle Spray Jet Brass Nozzle Brass Fire Nozzle
read more
Hydroshield Jumbo Fire Water Curtain Nozzle
Hydroshield Jumbo Fire Water Curtain Nozzle 1.Product Description Winner Water Curtain nozzle is made of aluminum plate into a fan shape. It is suitable for petrochemical toxic gases and fire-fighting fires. Water curtain barriers are arranged to control the spread of smoke, reduce the temperature of fireworks, cover fires and save people. 2.Product Parameter Model WF-CN65 Max.Working Pressure 7 Bar Inlet Size 2.5" Flow Rate 1300 LPM -1600LPM Coupling BSP /Storz /NH /GOST /INST /Machino Material Aluminium Alloy 3.Products Features 1) suitable for petrochemical toxic gases and fire-fighting fire; 2) comfortable with Quick Attach fire hose; 3) Water curtain barriers are arranged to control the spread of smoke, reduce the temperature of fireworks, cover fires and save people

Related Tags :
Fire Water Curtain Nozzle Jumbo Water Curtain Nozzle Hydroshield Nozzle
read more
580 LPM Fire Protection and Rescue Stream Spray Defense Fire Nozzle
580 LPM Fire Protection and Rescue Stream Spray Defense Fire Nozzle Multi-Purpose Nozzles are technologically advanced nozzles with both solid bore and fog stream capability. The nozzle offers the flexibility to flow both at the same time or independently. Solid bore provides excellent reach and penetration at low pressure,whilst fog stream offers protection and rapid cooling. Inlet size is available in either 1-1/2" (38 mm),2" (50mm) or 2-1/2" (65 mm). The Multi-Purpose Nozzles allows with both Straight stream and fog stream capability, Offering the Flexibility to flow both at the samt time or independenty. The fog mode can help the fire fighter release the heat at the same time of straight stream pattern. Main Features 1. Strong Light Weight Aluminum Construction. 2. Tight Stream and 130° Wide Dense Fog Pattern. 3. Working Pressure: 100PSi or 7Bar. 4. Connection Size Available: 1.5'', 2.5''. 5. Connection Type Available: Storz, NH, BIC, or JIC. 6. Max Flow Distance: 34M. Product Parameter Type# Orifice Pressure (Bar) Flow Rate for Straight Stream (LPM) Flow Rate for Fog Pattern (LPM Flow Rate Total (LPM) QZH6.0/10ZB 3/8'' (10mm) 3.5 5 7 87 110 136 160 190 228 250 285 360 1/2'' 13mm 3.5 5 7 170 228 250 160 190 228 326 418 456 5/8'' 16mm 3.5 5 7 285 360 380 160 190 228 399 510 580

Related Tags :
Defense Fire Nozzle Stream Spray Fire Nozzle Fire Nozzle Fire Protection Nozzle Fire Rescue Fire Nozzle
read more
Fire Fighting Chemical Attack Dry Powder Fire Nozzle
Fire Fighting Chemical Attack Dry Powder Fire Nozzle Winner Attack Dry Powder Nozzle is a highly effective, robust and lightweight nozzle designed, providing high performance delivery of a wide range of dry powder extinguishing agents. Manufactured from hard anodised aluminium and fitted, the Attack Dry Powder Nozzle is designed to provide excellent corrosion resistance and is suited to multiple applications across a range of industry sectors and fire risk scenarios. Principally used to combat fires in flammable liquids, gases, and greases (Class B) the Attack Dry Powder Nozzle fulfills multiple applications including the protection of refinery processes and industrial machinery. Available in a choice on two standard threaded inlets (1” NH female or 1” BSP female) for compatibility to all international inlet fittings (available on request). Features: Strong Light Weight Aluminum Construction. With Shut off Ball Valve Anodized and anticorrosive. T5 heat treatment. Working Pressure: 10Bar. Connections Size Available: M39x2, Φ32 Max Flow Distance: 16M Suitable for oily fire such as oil depots, oil field, chemicals and etc Key Users: Aviation Defence Industrial Petrochemical Machinery Plants Fire Training Centres

Related Tags :
Dry Powder Fire Nozzle Attack Fire Nozzle Chemical Fire Nozzle Attack Dry Powder Nozzle
read more
500 LPM Constant Flow Pistol Grip Automatic Fire Nozzle
500 LPM Constant Flow Pistol Grip Automatic Fire Nozzle Winner turbo jet fire nozzle is a constant flow nozzle(flow remains constant and stable in all patterns). It can remain working when you change from different modes straight stream, fog spray or flush without shutting down. Main Features 1. Mainly equipped with firefighting forces and professional fire brigades for various fires. 2. Strong lightweight aluminum construction. 3. The flow rate is automatic adjusted based on the change of water pressure. 4. The water column has a long and stable range, and it still maintains quality range stability even at low pressure. 5. The recoil force is small. When it is pressurized or decompressed, the delay function works as a constant pressure to buffer the water flow change, which eliminate the recoil force on user and relieve the physical intensity on the user. 6. Nozzle is equipped with an atomized cone to make the spray more refined and better heat absorption effect. 7. Anodized and anticorrosive. T5 heat treatment. Product Parameter Weight (excl.coupling) 2.2 kgs Material Body Lightweight hard anodized aluminum Valve Aluminum Handle Horseshoe (Injection Molded Nylon red Handle) Bumper Rubber Working pressure 7 bar (100 psi) Max. pressure 25 bar (360 psi) Max. fog angle 130 ° Throw range 38 meter @ 7 bar Flow range 500 LPM (Automatic) Flush Inlet Size 1.5" (40 mm) Inlet coupling style Storz,INST.,NH,GOST,etc.

Related Tags :
Automatic Fire Nozzle Constant Flow Fire Nozzle Pistol Grip Automatic Fire Nozzle
read more

first page
<< 1 2 3 4 5 >>
last page

A total of

pages