Wholesale Best Garden Quick Use Hydrant Products,garden Quick Use Hydrant Suppliers,manufacturers

Categories

Contact Us

86-0595-86801910 ivy.xiao7 info@winnerfirehose.com

Hot products

garden-quick-use-hydrant

View :

Grid View List View

1~2 KG Fire Extinguisher Fixing Bracket
1~2 KG Fire Extinguisher Fixing Bracket Material:Plastic Type:Suitable for 1-2kg Dry Powder Extinguisher High:190mm~240mm Inside Diameter:95mm~115mm Installation method:Nail or drill hole fixed Just Contact us for more information you are interested, and you will get quick response for your need.

Related Tags :
Fire Extinguisher Bracket Vehicle Wall Mount Household Fire Extinguisher Holder Bracket Plastic Car Fire Extinguisher Bracket 2kg Plastic Fire Extinguisher Bracket Vehicle 1kg Plastic Fire Extinguisher Rack
read more
Vietnam Fire Hydrant Water Distribution Valve
Vietnam Fire Hydrant Water Distribution Valve Vietnam Fire Hydrant is used in warm areas with water in the barrel always. The outlets are individually controlled and the mechanical parts are easy to access above ground. Specification Body material: Cast Iron Outlet: DN65 Working pressure: 10bar (KG/CM2) Finishing: Red Epoxy coated Body Ductile iron O-ring NBR Hose Outlet 2.5" Mounted Tooth and Lid Aluminum Features: 1. Connect fire hose with water pipes quickly and conveniently. 2. Cast iron with high strength and durability. 3. An important equipment for urban roads, residential areas, industrial parks and some establishments where to guard public safety Just feel free to contact us or leave message for sample, price or details specifications, catalog or test report.

Related Tags :
Vietnam Fire Hydrant 2 way fire hydrant valve 2 outlets fire valve Vietnam fire valve 2 way fire valve Hydrant Water Distribution Valve
read more
Ductile Iron Fire Hydrant Valve for Vietnam Russia
Ductile Iron Fire Hydrant Valve for Vietnam Russia Fire Hydrant Valve is a connector to fire water supply with the valve interface, used for factory, warehouse, high-rise buildings, public buildings and ship . normally installed in fire hydrant box, with fire hoses and water gun or wait for equipment supporting the fire equipment . Type: indoor fire hydrant Model: WFHV - 50 Material: made of ductile material Inlet interface: 50 mm-2 inch / 65mm - 2.5 inch Intake type: cylindrical pipe female thread Outlet type: cylindrical pipe male thread with duct buckle Outlet Diameter: 50 mm / 2 inch Rated working pressure: 1.6 Mpa For water and foam mixed liquid only Standard: certification: ISO9001 in accordance with GB3445 china national standard

Related Tags :
van góc chữa cháy d65 Fire Hydrant Valve Ductile Iron Fire Hydrant Valve Vietnam fire angle valve iron casting fire angle valve DN65 outlet fire hydrant valve
read more
Aluminum Russian Gost type fire hose coupling
Aluminum Russian Gost type fire hose coupling

Related Tags :
Aluminium Russian hose coupling Russian Gost coupling Gost type fire hose coupling Russian Gost hose fitting Russian Gost connection Russian Gost quick connectio
read more
DN20 DN25 ESRF fire sprinkler K202
DN20 DN25 ESRF fire sprinkler K202

Related Tags :
quick response fire sprinkler 68 degree quick response sprinkler ESFR fire sprinkler K202 fire sprinkler K11.4 fire srinkler ESFR
read more
74 degree centigrade K14.2 ESFR fire sprinkler
Early Suppression Fast Response Fire Sprinkler for Storage

Related Tags :
K242 fire sprinkler 74 degree quick response sprinkler Early Suppression Fast Response fire sprinkler larger water flow fire sprinkler K14.2fire sprinkler
read more
High Quality 2 Ways with Valves Wet Barrel Pillar Hydrant
High Quality 2 Ways with Valves Wet Barrel Pillar Hydrant British wet hydrant is used in warm areas with water in the barrel always. The outlets are individually controlled and the mechanical parts are easy to access above ground. Specification Body material: Cast Iron to BS 1452 Inlet : 4" Table T BS 10 Flange Outlet: Copper Alloy 2x2.5" Control Valve with Female BS Inst. Outlet Test pressure: 30bar(435 psi) Working pressure: 20bar(290 psi) Finishing: Red Epoxy coated 2.Parameters Body Ductile iron as BS 1452 O-ring NBR Valve Assembly Brass / Bronze Hose Outlet 2 x 2.5“ BS336

Related Tags :
Pillar Hydrant Wet Barrel Pillar Hydrant Wet Barrel Pillar Fire Hydrant
read more
2.5'' Brass Thread Inlet Oblique Fire Hydrant Landing Valve
2.5'' Brass Thread Inlet Oblique Fire Hydrant Landing Valve Landing valves are suitable for installation on wet risers in a building for fire fighting purposes, permanently charged with water from a pressurized supply. The landing valves are oblique type with threaded inlet and are manufactured with delivery hose connection and blank cap. The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bar. Technical Data Valve Type Oblique, Threaded Inlet Pressure Rating Low Pressure Valve Nominal Size DN 2 1/2" Working Pressure 15 Bar Maximum Test Pressure Valve Seat Test at 16.5 Bar • Body Test at 22.5 Bar Water Flow Rate 8.5 L/S @ 4 Bar Outlet Pressure

Related Tags :
Oblique landing valve 2.5inch landing valve
read more
2.5 Inch Flange Inlet Oblique Fire hydrant Landing Valve
2.5 Inch Flange Inlet Oblique Fire hydrant Landing Valve Oblique landing valves are suitable for installation on wet risers in a building for fire fighting purposes with permanently charged water from a pressurised supply. The landing valves are oblique type with flanged inlet and are manufactured to comply to BS 5041 Part 1 standard with delivery hose connection and blank cap complying with BS 336:2010 standard. The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bar. Product Parameter Code No. WFLV - F25 Body Material Copper Alloy Inlet 2.5”BS4504 Outlet 2.5”BS 336 Female coupling with plastic cap & chain Pressure Rating Low Pressure Valve Test pressure Valve Seat Test at 16.5 Bar • Body Test at 22.5 Bar Water Flow Rate 8.5 L/S @ 4 Bar Outlet Pressure Products Features Body material made of copper alloy to EN 1982 Hand wheel material made of grey cast iron to BS EN 1561 Blank cap material made of copper alloy to EN 1982 Possible to replace the gland seal when under pressure with the valve fully closed Disc facing rubber is of replaceable type Valves are provided with a strap and pad lock so that the hand wheel can be secured to counter unauthorized use The hand wheel is BLACK painted and body to RED

Related Tags :
fire hydrant landing valve 2.5 fire hydrant valve Flange Oblique Landing Valve
read more
Vietnam Throat to Receive Water Fire Pump Connector
Vietnam Throat to Receive Water Fire Pump Connector It is used to supply water to the fire fighting system by pumping water directly into the throat. The equipment is attached to the fire-fighting water pipe. Water-receiving plants or fire-fighting pillars are often installed in conjunction with a fire-fighting system. Used to pump water from fire engines for the system. Specification Body material: Cast Iron Outlet: DN65 Inlet: DN100 Working pressure: 10bar (KG/CM2) Finishing: Red Epoxy coated 2.Parameters Body Ductile iron O-ring NBR Hose Outlet 2.5" Mounted Tooth and Lid Aluminum Features: 1. Connect fire hose with water pipes quickly and conveniently. 2. Cast iron with high strength and durability. 3. An important equipment for urban roads, residential areas, industrial parks and some establishments where to guard public safety Just feel free to contact us or leave message for sample, price or details specifications, catalog or test report.

Related Tags :
Fire Pump Connector Throat to Receive Water
read more
Large Scale K115 QR Pendent 3mm Glass Bulb Fire Sprinkler

Related Tags :
Quick Response Fire Sprinkler QR FIRE SPRINKLER 3mm fire sprinkler bulb 68 degree Fire sprinkler head 68℃ Fire Sprinkler Auto response Fire Fighting Sprinkler
read more
DN20 Quick Response Automatic Fire Sprinkler

Related Tags :
DN20 Pendent Fire Sprinkler DN20 Brass fire fighting sprinkler DN20 Quick Response Fire Sprinkler Automatic Fire Guarder 68℃ Fire protecting Sprinkler Quick Response fire sprinkler
read more
2 Inch Brass Oblique Fire Valve Storz
2 Inch Brass Oblique Fire Valve Storz Fire Valve is a connector to fire water supply with the valve interface, used for factory, warehouse, high-rise buildings, public buildings and ship, normally installed in fire hydrant box, with fire hoses and water gun or wait for equipment supporting the fire equipment . Type: Fire Valve Storz Model: WFHV - B50 Material: Brass Inlet interface: 50 mm / 2 inch Rated working pressure: 1.6 Mpa For water and foam mixed liquid only Standard: Manufacture and certified to DIN 14461 Name Indoor fire hydrant Body Material Brass Valve Rod Material Brass Size 50mm Packing Carton with pallet Delivery time 15-20 days OEM Avaliable Original Made In China

Related Tags :
Fire Valve Storz Oblique Fire Valve Brass Fire Valve Fire Valve with Swivel Joint 2Inch Fire Valve
read more
Quick Connect External Lug Forestry Expansion Ring Couplings
Quick Connect External Lug Forestry Expansion Ring Couplings Quick Connect Forestry Couplings are Hardcoat Anodised with no dyes or colouring used. Hardcoat is a hard, dense coating formed by converting the surface of the aluminium alloy into a hard aluminium oxide. This process provides the completed part with a hardened surface that resists corrosion and abrasion, and reduces electrolysis. The result – reliability and performance when you need it most. Sizes: 1½″ connecting face for either 1″ or 1½” forestry hose Features: Made from aluminium forgings External lugs for faster action in the field where quick connection counts. No threads to damage, hang up or seize. Complete reliability in demanding situations. Related product to Aluminum Russian Gost type fire hose coupling We serve customers for over 30 years — so we’ve got the knowledge and industry experience to help you get it right. If you would like to know more fire hose, just click fire hose coupling. or Send inquiry now.

Related Tags :
Forestry Expansion Ring Couplings Forestry Couplings Quick Connect Forestry Couplings
read more
1.5 Inch Brass Hydrant Valve Machino
1.5 Inch Brass Hydrant Valve Machino Fire Valve is a connector to fire water supply with the valve interface, used for factory, warehouse, high-rise buildings, public buildings and ship, normally installed in fire hydrant box, with fire hoses and water gun or wait for equipment supporting the fire equipment . Type: Fire Valve Machino Model: WFHV - M15 Material: Brass Inlet interface: 1.5 inch Rated working pressure: 1.6 Mpa For water and foam mixed liquid only Name Indoor fire hydrant Body Material Brass Valve Rod Material Brass Size 1.5" Packing Carton with pallet Delivery time 15-30 days OEM Avaliable Original Made In China

Related Tags :
Brass Hydrant Valve 1.5 Inch Hydrant Valve Hydrant Valve Machino 1.5 Inch Valve
read more
Europe Aluminum Fire Hydrant Standpipe
Europe Aluminum Fire Hydrant Standpipe The standpipe for underground hydrant with one or two outlets with valve and Storz coupling C or B is used to take water from undergroundwater hydrants and supply water to a specific location. The single-spout attachment is used for underground hydrants with lower water flow. Specification Material: Aluminum Alloy Outlets: 2 way Valve Type: Screw Down Size: C2C, B2C, B2B 2.Parameters Model Inlet Outlet HS-C2C 2" (DN52) 2X2" STORZ C HS-B2C 3" (DN 80) 2X STORZ C HS-B2B 3" (DN 80) 2X STORZ B

Related Tags :
Hydrant Standpipe Fire Hydrant Standpipe Aluminum Hydrant Standpipe Europe Hydrant Standpipe
read more

first page
<< 1 2 3 4 >>
last page

A total of

pages