D65 Large Image To View Larger Image Fire Angle D65 Tgcn 33101 Vietnamsteels Fire Angle Valve

Categories

Contact Us

86-0595-86801910 ivy.xiao7 info@winnerfirehose.com

Hot products

d65-large-image-to-view-larger-image-fire-angle-d65-tgcn-33101-vietnamsteels-fire-angle-valve

View :

Grid View List View

Eight Ports Fire Pump Water Manifold
Eight Ports Fire Pump Water Manifold Fire manifolds are used for distributing the extinguishing medium from one feed line over several hose lines, or in special cases for collecting it in the reverse direction. Each hose line can be shut off individually by means of a stop valve. The stop valve of the dividers must be easy operated in the usual flow direction at 16 bar and in the opposite direction at 6 bar. Aluminum construction full penetration welds, one multi lug 12" connection, eight Machino 2.5" connections. Other configurations available consult for your specific requirements. Other connections are available such as BS336, Storz etc. Technical Parameters: Item Inlet Outlet Valve Type Eight Port Manifold DN300 DN150*2 DN80*6 Butterfly Valve / Stop Valve DN150*2 DN65*6 DN80*8 Butterfly Valve DN65*8 Butterfly Valve

Related Tags :
Water Manifold Pump Water Manifold Fire Pump Water Manifold
read more
Fire Siamese Ball Type Shut off Water Divider for Forest Fire Fighting
Fire Siamese Ball Type Shut off Water Divider for Forest Fire Fighting 1.Product introduction Fire Water Dividers are used for distributing the extinguishing medium from one feed line over several hose lines, or in special cases for collecting it in the reverse direction. Each hose line can be shut-off individually by means of a stop valve. dividing breeching is a popular product in the fire protection and water delivery market, used commonly to split one length of hose to provide the handler with two or three outlets. All of our water delivery products can be adapted for use with any international fittings. 2.Product Parameter Item No. Inlet Outlet WD2F 1” 2X1” WD2F-2 1.5” 2x1” 3.Products Features a.Material:Aluminum alloy b.Inlet and outlet connection to forest couplings c.Red paint finish outside. d.Special connection inlet and outlet available upon request

Related Tags :
Water Divider for Forest Ball Type Shut off Water Divider Fire Siamese
read more
Forestry Poppet Check Valve Primer

Related Tags :
Poppet Check Valve Check Valve Primer Primer Forestry Poppet Check Valve Forestry Check Valve Primer Forestry Check Valve
read more
Fire Water Pump Suction Filter

Related Tags :
Suction Filter Pump Suction Filter Water Pump Filter Water Suction Filter Water Pump Suction Filter Fire Water Filter
read more
Forest Water Pump Foot Valve Strainer

Related Tags :
Foot Valve Strainer Water Pump Strainer Pump Foot Valve Strainer Forest Water Strainer Forest Pump Strainer Forest Foot Valve Strainer
read more
1.5 Inch Twin Tip Straight Stream Forestry Fire Nozzle
1.5 Inch Twin Tip Straight Stream Forestry Fire Nozzle Straight stream nozzle shapes and directs water for fire application. Solid jet keeps working from a safe distance. It is usually made of brass or aluminum.It is one of important and indispensable water jetting tool for fire fighting equipment. The solid one piece reversible twin tips have 1/4" and 3/8" orifices. Technical Parameters: Material Brass Size 1.5" Working pressure 16 Bar Discharge pattern Stream Couplings Storz, Machino, Instaneous, NH, Gost, Nakajima etc.

Related Tags :
Forestry Fire Nozzle Twin Tip Fire Nozzle Straight Stream Forestry Nozzle
read more
DC Jetting Direct Stream Fire Nozzle Shut Off
DC Jetting Direct Stream Fire Nozzle Shut Off 1.Product Introduction Fire nozzle shut off is a fire extinguishing device that is connected to a hose to spray a dense, full stream of water. It has the advantages of long range and large amount of water and easy shut off with single lever. 2.Product Parameter Material Aluminum Alloy Size 2" Working pressure 25 Bar Test pressure 37.5 Bar Discharge pattern Direct Stream Rated DC Flow Rate 7.5L/S Jet Distance ≥ 28M

Related Tags :
Fire Nozzle Shut Off DC Fire Nozzle DC Jetting Fire Nozzle
read more
Aluminum Alloy Single Outlet Storz Fire Hydrant Standpipe
Aluminum Alloy Single Outlet Storz Fire Hydrant Standpipe Fire standpipe is basically a fire hydrant inside a building. Firefighters connect hoses to the standpipe to access water used to fight a building fire. Standpipes connect to a building's main water supply through a series of smaller pipes. It is a simple outdoor fire hydrant to used with underground fire hydrant. Specification Standpipe shaft: Alu.alloy Standpipe base&head: Alu.alloy Gasket: Rubber Size: Inlet 2", Outlet 2" storz Working pressure: 10Bar

Related Tags :
Hydrant Standpipe Fire Hydrant Standpipe Aluminum Hydrant Standpipe Storz Hydrant Standpipe
read more
Single Outlet BS Aluminum Fire Hydrant Standpipe
Single Outlet BS Aluminum Fire Hydrant Standpipe Standpipes are available from Winner in a number of different types. They screw onto the outlet of the underground hydrant. Single outlet fire hydrant standpipes come with a swivel connection to a shaft.The standpipe has a 2.5” female URT inlet and a twist release 2.5”female instantaneous outlet 2.Product Parameter Model No SHS02 Inlet 2.5”female URT Outlet 2.5”Female instantaneous with plastic cap and chain 3.Products Features A.Standpipe shaft: aluminium alloy to BS 1474 B.standpipe base & Head:Aluminium alloy to BS1490

Related Tags :
BS Hydrant Standpipe Single Outlet Standpipe
read more
Aluminum Alloy Double Outlet BS Fire Hydrant Standpipe
Aluminum Alloy Double Outlet BS Fire Hydrant Standpipe 1.Product Introduction Standpipes are available in single or double outlet 65mm female instantaneous BS 336 and are connected to the shaft with a 65mm Male and Female Instantaneous (Double pull Release Type), or a swivel gland that will allow continuous rotation of the head through 360 deg. The head with an instantaneous connection may be removed but the swivel type is an integral part of the standpipe. Double outlet standpipe is supplied with a single 65mm male blank plug. 2.Product Parameter Model No SHS02 DHS Inlet 2.5" female URT 2.5" female BSRT Outlet 2.5" Female instantaneous with plastic cap and chain Double headed 21/2" Inst.Female with plastic cap and chain 3.Products Features A.Standpipe shaft:Aluminum Alloy to BS 1490 Copper Alloy to BS 2873 B.Standpipe Base and Head:Aluminum Alloy to BS 1490 Copper Alloy to BS 2873 C.Working Pressure:15 bar (217 psi) D.Test Pressure:22.5 bar (326 psi)

Related Tags :
Double Outlet Standpipe
read more
Adjustable Fire Hydrant Wrench
Feature of adjustable spanners 1.Corrosion resistant plating 2.Strong, forged steel construction 3.Fit pentagon or square nuts SPECIFICATIONS Adjustable Yes Color Silver Length [In] 20.0 Manufacturer Warranty REED Warranty Maximum Opening (In) 1.75 Maximum Pipe / Tube Diameter (In) 1.75 Minimum Pipe / Tube Diameter (In) 0.25 Set / Individual Individual Width (In) 3.0 Wrench Size 19.5 In. long x 3 In. wide x 1 In. high Wrench Material forged steel Wrench Style Adjustable Wrench Type hydrant

Related Tags :
Adjustable Fire Hydrant Wrench Adjustable Fire Hydrant Wrench Tool Adjustable Fire Hydrant Spanner Fire Hydrant Wrench Company carbon steel fire hydrant wrench high quality f wrench for fire hydrant valve
read more
Fire Hydrant Water Splitter Wye Fire Hose Ball Valve
Fire Hydrant Water Splitter Wye Fire Hose Ball Valve 1. Product introduction Our ball valve wyes are designed to divide one stream of water into two, similar to our plain wyes. They’re also equipped with a female swivel inlet and two rigid male outlets. However, the ball valve wye’s ¼ turn handles give the user the ability to shut off water to either outlet. 2. Product Parameter Item No. Inlet Outlet FHS2515 2½” F Swivel NH 2X1.5” M NH FHS2515 - 2 2½” F Swivel NST 2x1.5” M NST 3. Products Features a.Material: Aluminum alloy b.Inlet and outlet connection to threaded couplings c.Red paint finish outside. d.Special connection inlet and outlet available upon request

Related Tags :
Hydrant Wye Valve Fire Hose Ball Valve Water Splitter Wye
read more
115 - 475 LPM Adjustable Pistol Grip Fire Nozzle
115 - 475 LPM Adjustable Spray Gun Type Fire Nozzle Winner WFSN-475 gun type fire nozzle is a constant gallonage nozzle(flow remains the same in all patterns), with multiple flow settings for operator flow control.The WFSN-475 has four flow classes,115-230-360-475 LPS, and it is available both for straight stream,fog spray and flush without shutting down. Main Features 1. Strong light weight anodized aluminum construction. 2. DuPont Nylon handle and pistol grip. 3. Stainless steel spinning teeth offers high quality fog performance. 4. Rubber bumper provides maximum durability in harsh condition. 5. Excellent for use with foam tube. Product Parameter Weight (excl.coupling) 1.8 kgs Material Body Lightweight hard anodized aluminum Valve Alu or SS304 Or Brass Handle Dupont Nylon Bumper Rubber Working pressure 7 bar (100 psi) Max. pressure 25 bar (360 psi) Max. fog angle 120 ° Throw range 40 meter @ 7 bar Flow range (selectable) 115 LPS @7 bar 230 LPS @7 bar 360 LPS @7 bar 475 LPS @7 bar Flush Inlet size 1.5 inch, 2 inch, 2.5 inch (Optional). Connection coupling NH, BSP, Storz, BS336, Forestry and Machino CouplingStorz,etc.

Related Tags :
Gun Type Fire Nozzle fire hose nozzle fire fighting spray nozzles pistol grip fire nozzle Gun Fire Nozzle
read more
Fire Hose Washer Hose Cleaner
Fire Hose Washer Hose Cleaner The Winner Hose Washer provides an easy means of cleaning all types of fire and water hoses. Wide angle forward facing internal jets help to push the hose through the drum cleaning as it passes through. Only normal mainline pressure is required for fast, effective cleaning. Fitted as standard with a 1.5" NPSH female threaded inlet for compatibility with any International Adaptor. Features Fast Hose Cleaning Suitable for Hoses up to 77mm (3") Internal Jet Cleaning Forward-Facing Jets Pushes Hose Through the Drum 1 1/2" NPSH Female Threaded Inlet Robust Construction Key Users Fire & Rescue Services Airport Fire Crews Defence Sectors Major Industrials Marine & Off-Shore Sectors Petrochemicals Oil & Gas

Related Tags :
Hose Washer Hose Cleaner Fire Hose Washer Fire Hose Cleaner Fire Hose Cleaning Machine
read more
Portable Electric Fire Hose Roller
Portable Electric Fire Hose Roller Compact battery-operated fire hose roller tool with a powerful built-in electric motor minimizes the time required for reeling unwound fire hoses after action or training. Robust steel frame. The heavy-duty parts of all the shafts are made of high-strength steel. Durable surface finish – powder-coated. Powerful DC motor, water and dust resistant. Charger included. Safe operation thanks to low working voltage. Durable control elements. Unique design ensuring high stability during winding and allows for easy handling of the wound hose. SPECIFICATIONS FOR FIRE HOSE ROLLING MACHINE PRODUCT NAME Fire Hose Roller MATERIAL Steel SIZE 55*38*41cm WEIGHT 16.5kg BATTERY Working Time 1.5-2H RATED VOLTAGE 24V SUITABLE COUPLING DIAMETER 1.5''/2''/2.5''/3'' COLOR RED Feature Easy-to-operate fire hose winding system Small in size, light in weight, fast in speed, and can be carried on board the vehicle Quick and convenient winding of fire hoses 1.5"~3" Intelligent control system adjusts the speed of winding Battery-operated, with screen to show volume Applications • Rewinding fire hoses

Related Tags :
Electric Fire Hose Roller Fire Hose Roller Electric Hose Roller Portable Fire Hose Roller Portable Electric Hose Roller
read more
Multifunction Manual Fire Hose Roller Trolley
Multifunction Manual Fire Hose Roller Trolley The Hose Roller Trolley is designed to quickly, cleanly and efficiently recoil layflat fire hoses after use saving time and greatly reducing back strain minimising time off work through injury. Conventional coiling or Dutch rolling of hoses is possible fitted with any British or International Couplings. Once recoiled the Hose Roller Trolley is simply tilted left or right and the hose slips off perfectly coiled and ready for re-use. Commonly used by Fire & Rescue Services but equally suited to any applications that use layflat fire hoses. SPECIFICATIONS FOR FIRE HOSE ROLLING MACHINE PRODUCT NAME Fire Hose Roller MATERIAL Steel SIZE 106*51*41cm WEIGHT 21kg SUITABLE COUPLING DIAMETER 1.5''/2''/2.5''/3'' COLOR RED Feature Easy-to-operate fire hose winding system High quality construction, powder coated Foldable, small in size, light in weight, fast in speed, and can be carried on board the vehicle. Quick and convenient winding of fire hoses 1.5"~3" Multiple rolling styles, conventional or Dutch Applications • Rewinding fire hoses

Related Tags :
Fire Hose Roller Trolley Hose Roller Trolley Manual Hose Roller Trolley Multifunction Fire Hose Roller
read more

first page
<< 11 12 13 14 15 16 17 18 19 >>
last page

A total of

pages