Wholesale Best 2 Way Breeching Inlet For Riser Products,2 Way Breeching Inlet For Riser Suppliers,manufacturers

Categories

Contact Us

86-0595-86801910 ivy.xiao7 info@winnerfirehose.com

Hot products

2-way-breeching-inlet-for-riser

View :

Grid View List View

5KG CO2 Fire Extinguisher Safety Valve
5KG CO2 Fire Extinguisher Safety Valve Material:Brass Inlet Thread : PZ27.8 Outlet Thread: W21.8 Gauge Connection Thread :NPT 1/8" Dip Tube Thread: M10*1 Other type Fire Extinguisher Valve Just Contact us for more information you are interested, and you will get quick response for your need.

Related Tags :
CO2 Cylinder Valves For Fire Fighting Brass CO2 valve Body Safety CO2 Fire Extinguisher Valves Portable Fire Extinguisher Valves CO2 Fire Extinguisher parts
read more
Vietnam Fire Hydrant Water Distribution Valve
Vietnam Fire Hydrant Water Distribution Valve Vietnam Fire Hydrant is used in warm areas with water in the barrel always. The outlets are individually controlled and the mechanical parts are easy to access above ground. Specification Body material: Cast Iron Outlet: DN65 Working pressure: 10bar (KG/CM2) Finishing: Red Epoxy coated Body Ductile iron O-ring NBR Hose Outlet 2.5" Mounted Tooth and Lid Aluminum Features: 1. Connect fire hose with water pipes quickly and conveniently. 2. Cast iron with high strength and durability. 3. An important equipment for urban roads, residential areas, industrial parks and some establishments where to guard public safety Just feel free to contact us or leave message for sample, price or details specifications, catalog or test report.

Related Tags :
Vietnam Fire Hydrant 2 way fire hydrant valve 2 outlets fire valve Vietnam fire valve 2 way fire valve Hydrant Water Distribution Valve
read more
Flat Hose Cradle for Hose Pipe
Surface Mounted Fire Hose Cabinet Fire Hose Reel Cabinets are designed to accommodate fire hose reel, fire fighting equipment and breeching inlet. Fire hose cabinets parameter Material: High quality cold rolled Mild Steel Mounting: Surface Size: 650*650*160mm, 750*750*280mm, 760*760*240mm or Customerized size Finishing: (MS) epxoy powder coated Fire hose reel 1.5" or 2" Features 1.Cabinet material made of Electro Galvanized sheet or Stainless Steel Sheet (Full stainless steel brush or mirror finish). 2.Locking of cabinet is either key operated or round handle cam latch. 3.Cabinets are available either in surface mounted or recessed mounted type. 4.Cabinet door shall be solid door or glass door (Clear glass or wired glass). 5.Breeching inlet cabinets are available in horizontal or vertical version.

Related Tags :
Flat Hose Cradle Cradle for Hose Pipe Hose Cradle
read more
Dry Riser Inlets 4 Way Breeching Inlet
Dry Riser Inlets 4 Way Breeching Inlet Breeching inlets are suitable for installation on dry risers only, in a building for fire fighting purposes, fitted with inlet connection at fire brigade access level and outlet connection at specified points, which is normally dry but capable of being charged with water by pumping from fire service appliances. The breeching inlets are manufactured to comply with BS 5041 PART-3:1975 standard comprising of male instantaneous connections complying with BS 336:2010, drain valves complying with BS 5154, PN16 rated and non return valves. The breeching inlets and its fittings are suitable for a normal working pressure of 10 bar. Products Features Body material made of spheroidal graphite cast iron (Ductile Iron) to BS 1563:2011 Inlet connection and non-return valves material made of copper alloy to BS 12163:2011 Each inlet connections are fitted with non-return valve and are of spring loaded mushroom type Each breeching inlet is painted RED internally and externally Product Parameter Code No. WFBL- 4 Body Material Cast Iron Inlet 4 x 2 1/2" Male instantaneous connections to BS336 each with spring-loaded non-return valve and blanking cap & chain Outlet Flanged 6" BS10 Table F or 150mm BS4504 PN16 Pressure Rating Normal Working Pressure of 16 Bar Test pressure 24 Bar Flange Drilling BS 4504 Part: 2:1974 Table: 16/21

Related Tags :
4 Way Breeching Inlet Dry Riser Inlets 4 Way Dry Riser breeching inlet
read more
2 Way Breeching Inlet for Riser
2 Way Breeching Inlet for Riser Two Way Inlet Breeching Valve comply fully with the requirements of BS5041 Part 3. The bodies are manufactured from cast iron or spheroildal graphite iron and all fittings are in gunmetal making these inlet breechings extremely durable. The 2-way dry riser inlet breeching has 2 x 2½” Instantaneous male non return valve inlets and a 4″ PN16 or Table D outlet flange. The 4-way inlet breeching has 4 x 2½” Instantaneous male non return valve inlets and a 6″ PN16 or Table D outlet flange. The 2-way and 4-way also comes complete with 1″ drain valve. Product Parameter Code No. WFBL- 2 Inlet 2 Nos. 2-1/2” Male Instantaneous Connector Complying to BS 336 Outlet 100mm Flange outlet Working Pressure 16 Bar Test pressure Hydrostatically tested to 24,Non-return valve tested to 22.5 bar Flange size BS 4504 / BS10D TABLE D Products Features Manufactured in accordance with BS 5041 : Part 3 : 1975. High quality casting finishes. 25 mm drain valve with blanking cap and chain. Vertical or horizontal mounting.

Related Tags :
2 Way Breeching Inlet 2 Way Breeching Inlet for Riser Fire Breeching Inlet
read more
Vietnam Throat to Receive Water Fire Pump Connector
Vietnam Throat to Receive Water Fire Pump Connector It is used to supply water to the fire fighting system by pumping water directly into the throat. The equipment is attached to the fire-fighting water pipe. Water-receiving plants or fire-fighting pillars are often installed in conjunction with a fire-fighting system. Used to pump water from fire engines for the system. Specification Body material: Cast Iron Outlet: DN65 Inlet: DN100 Working pressure: 10bar (KG/CM2) Finishing: Red Epoxy coated 2.Parameters Body Ductile iron O-ring NBR Hose Outlet 2.5" Mounted Tooth and Lid Aluminum Features: 1. Connect fire hose with water pipes quickly and conveniently. 2. Cast iron with high strength and durability. 3. An important equipment for urban roads, residential areas, industrial parks and some establishments where to guard public safety Just feel free to contact us or leave message for sample, price or details specifications, catalog or test report.

Related Tags :
Fire Pump Connector Throat to Receive Water
read more
Water Pressure Release Valve for Fire Fighting
Water Pressure Release Valve for Fire Fighting The valve consists of the main valve and outside installed control pilot valve, mainly installed in the bypass of the protected water supply system in the building, guarantee the pressure of the main valve upstream water supply zone, when the pressure in the water supply pipe exceeds the pressure set by the pressure releasing valve, the pressure releasing valve is switched on to prevent pipeline and equipment from damage by pressure exceeding. This valve is mainly used in pressure releasing of the fire test circulation system in high-rise buildings, is the upgrade replacement product of the spring safety valve. Features: 1)Reasonable and novel structure, reasonable use of the hydraulic principle to control. 2)Long service life. 3)Valve clack quick opening and slow closure, no water hammer impacting. 4)High sensitivity, safe pressure discharge. 5)Stable operation, no noise.

Related Tags :
Pressure Release Valve Water Pressure Release Valve Pressure Release Valve for Fire Fighting
read more
Water Pressure Relief Valve for Fire Fighting
Water Pressure Relief Valve for Fire Fighting This valve is used for the high building fore-fighting system,To prevent the pipeline and equipment damage due to overpressure. The body uses full passage streamline design, of a small fluid resistance and a heavy flow. This valve can be used as either a pressure releasing or holding valve. when used as the former, it can release the pressure surpassing the safe value set with the pilot valve and keep the pressure inside of the pipeline below the safe value to prevent system against danger due to an excessively high water pressure;while used as the latter,it can keep the upstream water supply pressure of the main valve over some set value,this is because water supply to the downstream can not be done,unless the upstream is higher than the set value,in order to make sure of he upstream water supply pressure of the main valve.

Related Tags :
Pressure Relief Valve Water Pressure Relief Valve Pressure Relief Valve for Fire Fighting
read more
One Way Non Return Swing Check Valve
One Way Non Return Swing Check Valve Rubber disc check valve is mainly composed of body, cover and rubber disc three parts.Rubber disc is made by steel plate, steel bar and the reinforced nylon fabric substrate.This valve is usually installed in the outlet of the pump or inlet of water pool to prevent the water backflow and avoid damages to the pump caused by the water hammer phenomenon. The water flow in water supply or irritation networks often starts or stops abruptly causing hydraulic hammer shock, the main factor for breakage and damages of the pumps and pipes. The check valve with the rubber blocking eliminates the pump and network destruction risks because it receives and absorbs all the created high pressure functioning like the shock absorber of an automobile. The rubber disc check valve is designed to provide the best possible protection to pump installations and water networks. Advantages: Absorbs part of the hydraulic surge waves Silent operation Smooth liquid flow Little maintenance required Applications: Irrigation Water supply networks Pump stations

Related Tags :
Swing Check Valve Non Return Check Valve One Way Check Valve
read more
High Velocity Water Spray Nozzle For Fire Fighting

Related Tags :
High Velocity Water Spray Nozzle Water Spray Nozzle Water Spray Nozzle For Fire Fighting Spray Nozzle For Fire Fighting
read more
MV Type Fire Sprinkler Medium Velocity Spray Nozzles

Related Tags :
Medium Velocity Spray Nozzles MV Type Fire Sprinkler
read more
White Fire Sprinkler Head Guard for Protecting Flush Mount & Side Wall & Semi Recessed Sprinkler
Fire Sprinkler Protective Chrome Finished Fire Sprinkler Guard

Related Tags :
Fire Sprinkler Head Guard Fire Sprinkler Head Protection Sprinkler Head Guard for Protecting Flush Mount Sprinkler Sprinkler Head Guard for Side Wall Sprinkler
read more
Deep Fire Sprinkler Head Cage for Sprinkler with Deep Cup and Skirt Escutcheon
Deep Fire Sprinkler Head Cage for Sprinkler with Deep Cup and Skirt Escutcheon Sprinkler Head Guards provide sprinkler head protection from occasional light contact in warehouses, institutional and other applications where the occupancy exposes the sprinkler head to potential damage from its environment. Sprinkler Head Guards do not protect sprinkler heads from direct impact or abuse. Features: 6“ deep heavy wire enclosure construction sprinkler head cage Excellent sprinkler head protector for sidewall & pendent head with deep cup and skirt escutcheon Provided with three wire-formed eyelets for a solid installation, nice protective cover Suitable for both 1/2" and 3/4" sprinkler head, ceiling mount and wall mount sprinkler head guard, strong protection Technical Data Size Color Finish Application Range Mark Dia 4.5" x 6" White / Red Powder Coated 1/2 " and 3/4" pendent or sidewall sprinkler head with deep cup and skirt escutcheon * Screw is upon request Sample is available,please feel free to contact us or leave message to us for sample,price or details specifications.

Related Tags :
Fire Sprinkler Head Cage Deep Fire Sprinkler Head Cage Cage for Sprinkler with Deep Cup Sprinkler Head Cage Sprinkler Head Protection
read more
Quick Connect External Lug Forestry Expansion Ring Couplings
Quick Connect External Lug Forestry Expansion Ring Couplings Quick Connect Forestry Couplings are Hardcoat Anodised with no dyes or colouring used. Hardcoat is a hard, dense coating formed by converting the surface of the aluminium alloy into a hard aluminium oxide. This process provides the completed part with a hardened surface that resists corrosion and abrasion, and reduces electrolysis. The result – reliability and performance when you need it most. Sizes: 1½″ connecting face for either 1″ or 1½” forestry hose Features: Made from aluminium forgings External lugs for faster action in the field where quick connection counts. No threads to damage, hang up or seize. Complete reliability in demanding situations. Related product to Aluminum Russian Gost type fire hose coupling We serve customers for over 30 years — so we’ve got the knowledge and industry experience to help you get it right. If you would like to know more fire hose, just click fire hose coupling. or Send inquiry now.

Related Tags :
Forestry Expansion Ring Couplings Forestry Couplings Quick Connect Forestry Couplings
read more
Red ABC Spanner Wrench for Storz Coupling
ABC Red Fire Hose Coupling Universal Spanner Wrench It is used to tighten and release fire Storz couplings on pipes, hydrants and pumps. Used to unlock and lock fire couplings C Ø52, B Ø75 and A Ø110. Features: - Constructed of cast iron - Standard color is Silver Standard is Silver, or we can supply any of these wrench powder coated Red Powder coat is a polymer resin based dry finish that is a durable non-conductive coating to help inhibit electrolysis.

Related Tags :
ABC Wrench ABC Spanner Wrench Storz Coupling Wrench Wrench for Storz Coupling Spanner for Storz Coupling
read more
Aluminum Collecting Breeching A/2B
Aluminum Collecting Breeching A/2B The Collecting Breechings are designed to supply water from two separate feed hoses of the same size into one larger drainage hose. It is equipped with a non-return valve that serves to break one supply line in case of pressure drop. Contains one Ø 110 (A) coupling on one side and two Ø 75 (B) couplings on the other. Made of light alloy and provided with two Storz B couplings on the inlets. Outlet fitted with Storz A coupling. Product Parameter Code No. B100 Inlet 2 Nos. 2-1/2” Storz Connector or as request Outlet 4" Storz Connector or as request Working Pressure 16 Bar Test pressure Hydrostatically tested to 24

Related Tags :
Collecting Breeching Aluminum Collecting Breeching Collecting Breeching A/2B
read more

first page
<< 1 2 3 4 5 >>
last page

A total of

pages