1 5 Inch Hydrant Valve

Categories

Contact Us

86-0595-86801910 ivy.xiao7 info@winnerfirehose.com

Hot products

1-5-inch-hydrant-valve

View :

Grid View List View

Heavy Duty Adjustable Fire Hydrant Wrench
Heavy Duty Adjustable Fire Hydrant Wrench It is used to open or close a hydrant by rotating the valve stem, and to remove the caps from the hydrant. Works both a pin and rocker lug. Features: For pentagon hydrant nuts up to 1 3/4 in. from point to flat Notched to fit 1 1/4 in. square hydrant nut Spanner for pin lug and rocker lug couplings 1 1/2 in. thru 6 in. Plated iron head with 7/8 in. plated steel handle Overall length 18 in.

Related Tags :
Fire Hydrant Wrench Adjustable Fire Hydrant Wrench Hydrant Wrench
read more
Red Overground Hydrant Key Type A
Red Overground Hydrant Key Type A Overground hydrant key type A: internal triangular type A solid steel design for overground hydrant, protective coating (malleable casting) in red length approx. 43 cm Features: Type A For Overground hydrants Inner triangular type A Solid steel design Protective coating (malleable casting) in red Length: approx. 43 cm

Related Tags :
Overground Hydrant Key Hydrant Key Hydrant Key Type A
read more
Plastic Fire Hydrant Hose Nozzle
Plastic Fire Hydrant Hose Nozzle 1.Product Introduction This is a nozzle suit to connect with fire hydrant hose / rack hose. It is a device used to supply water, provided with a adaptor for connection to spray a dense, full stream of water. 2.Product Parameter Material Plastic Size 1.5 inch Max working pressure 100 psi Flow rate 80 GPM Discharge pattern Capable of complete shutoff, straight stream or any degree of conical fog 3. Product Feature Made of polyamide resin with rubber gaskets. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.

Related Tags :
Plastic Fire Nozzle Hydrant Hose Nozzle Fire Hose Nozzle
read more
1.5 Inch Brass Fire Hydrant Hose Nozzle
1.5 Inch Brass Fire Hydrant Hose Nozzle 1.Product Introduction This is a nozzle suit to connect with fire hydrant hose / rack hose. It is a device used to supply water, provided with a adaptor for connection to spray a dense, full stream of water. 2.Product Parameter Material brass Size 1.5 inch Max working pressure 100 psi Discharge pattern Capable of complete shutoff, straight stream or any degree of conical fog 3. Product Feature Made of brass with rubber gaskets. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.

Related Tags :
Fire Hydrant Hose Nozzle 1.5 inch Fire Nozzle Brass Fire Hose Nozzle
read more
Fire Fighting Fire Hose Suction Strainer with Check Valve

Related Tags :
Suction Strainer Suction Strainer with Check Valve Strainer with Check Valve Fire Hose Suction Strainer Fire Suction Strainer Fire Fighting Suction Strainer
read more
1 Inch Compact Wildland Forest Fire Nozzle Gun
1 Inch Compact Wildland Forest Fire Nozzle Gun Winner Forest Fire Nozzle is economical, lightweight, and dependable nozzles. Their rugged construction is compatible with the use of fresh water as well as firefighting foam concentrate. Other important operating features include: * Quick-acting pattern control from straight stream to wide fog * Fixed fog teeth; * Metal spinning fog teeth available on some models; * Easily flushable while flowing to clear trapped debris; * Quick-change fire hose coupling; Forest Fire Nozzle has a selectable flow range at 7 bar of 15,30,45 and 60 litres per minute to meet the individual needs of the fire fighter at any given time but alternative flow rates are available. Features: Model WFN - F25 Flow rate 15 - 30 - 45 - 60 LPM - Flush (Selectable) Working pressure 0.7MPa Inlet size 1"; 1.5" Coupling srandard STORZ; GOST;INST; etc. Material Hard anodized aluminium alloy

Related Tags :
Forest Fire Nozzle Wildland Fire Nozzle Fire Nozzle Gun Compact Fire Nozzle 1 Inch Fire Nozzle
read more
Fire Fighting 3 Way Wye Hose Valve
Fire Fighting 3 Way Wye Hose Valve Durable, lightweight wye hose valves are constructed of high-quality aluminum with anodized hose adaptors built for rugged use. The valve opens and closes with a quarter turn. Polymer ball and seat/seal mechanism with o-rings provides a reliable seal and ease of operation at working pressures of 145 psi. Other connections are available such as BS336, Storz etc. Technical Parameters: Item Inlet Outlet Valve Type 3 Way Wye Hose Valve DN65 DN65*3 Ball Valve DN80 DN65*3 DN80*3

Related Tags :
Wye Hose Valve 3 Way Wye Valve Fire Fighting Wye Valve
read more
2 Way Wye Fire Hose Ball Valve
2 Way Wye Fire Hose Ball Valve Durable, lightweight wye valves are constructed of high-quality aluminum with anodized hose adaptors built for rugged use. The valve opens and closes with a quarter turn. Polymer ball and seat/seal mechanism with o-rings provides a reliable seal and ease of operation at working pressures of 145 psi. Other connections are available such as BS336, Storz etc. Technical Parameters: Item Inlet Outlet Valve Type 2 Way Wye Valve DN65 DN65*2 Ball Valve DN80 DN65*2 DN80*2

Related Tags :
Fire Hose Ball Valve 2 Way Wye Valve Wye Fire Hose Valve
read more
Forestry Poppet Check Valve Primer

Related Tags :
Poppet Check Valve Check Valve Primer Primer Forestry Poppet Check Valve Forestry Check Valve Primer Forestry Check Valve
read more
Forest Water Pump Foot Valve Strainer

Related Tags :
Foot Valve Strainer Water Pump Strainer Pump Foot Valve Strainer Forest Water Strainer Forest Pump Strainer Forest Foot Valve Strainer
read more
Aluminum Alloy Single Outlet Storz Fire Hydrant Standpipe
Aluminum Alloy Single Outlet Storz Fire Hydrant Standpipe Fire standpipe is basically a fire hydrant inside a building. Firefighters connect hoses to the standpipe to access water used to fight a building fire. Standpipes connect to a building's main water supply through a series of smaller pipes. It is a simple outdoor fire hydrant to used with underground fire hydrant. Specification Standpipe shaft: Alu.alloy Standpipe base&head: Alu.alloy Gasket: Rubber Size: Inlet 2", Outlet 2" storz Working pressure: 10Bar

Related Tags :
Hydrant Standpipe Fire Hydrant Standpipe Aluminum Hydrant Standpipe Storz Hydrant Standpipe
read more
Single Outlet BS Aluminum Fire Hydrant Standpipe
Single Outlet BS Aluminum Fire Hydrant Standpipe Standpipes are available from Winner in a number of different types. They screw onto the outlet of the underground hydrant. Single outlet fire hydrant standpipes come with a swivel connection to a shaft.The standpipe has a 2.5” female URT inlet and a twist release 2.5”female instantaneous outlet 2.Product Parameter Model No SHS02 Inlet 2.5”female URT Outlet 2.5”Female instantaneous with plastic cap and chain 3.Products Features A.Standpipe shaft: aluminium alloy to BS 1474 B.standpipe base & Head:Aluminium alloy to BS1490

Related Tags :
BS Hydrant Standpipe Single Outlet Standpipe
read more
Aluminum Alloy Double Outlet BS Fire Hydrant Standpipe
Aluminum Alloy Double Outlet BS Fire Hydrant Standpipe 1.Product Introduction Standpipes are available in single or double outlet 65mm female instantaneous BS 336 and are connected to the shaft with a 65mm Male and Female Instantaneous (Double pull Release Type), or a swivel gland that will allow continuous rotation of the head through 360 deg. The head with an instantaneous connection may be removed but the swivel type is an integral part of the standpipe. Double outlet standpipe is supplied with a single 65mm male blank plug. 2.Product Parameter Model No SHS02 DHS Inlet 2.5" female URT 2.5" female BSRT Outlet 2.5" Female instantaneous with plastic cap and chain Double headed 21/2" Inst.Female with plastic cap and chain 3.Products Features A.Standpipe shaft:Aluminum Alloy to BS 1490 Copper Alloy to BS 2873 B.Standpipe Base and Head:Aluminum Alloy to BS 1490 Copper Alloy to BS 2873 C.Working Pressure:15 bar (217 psi) D.Test Pressure:22.5 bar (326 psi)

Related Tags :
Double Outlet Standpipe
read more
Adjustable Fire Hydrant Wrench
Feature of adjustable spanners 1.Corrosion resistant plating 2.Strong, forged steel construction 3.Fit pentagon or square nuts SPECIFICATIONS Adjustable Yes Color Silver Length [In] 20.0 Manufacturer Warranty REED Warranty Maximum Opening (In) 1.75 Maximum Pipe / Tube Diameter (In) 1.75 Minimum Pipe / Tube Diameter (In) 0.25 Set / Individual Individual Width (In) 3.0 Wrench Size 19.5 In. long x 3 In. wide x 1 In. high Wrench Material forged steel Wrench Style Adjustable Wrench Type hydrant

Related Tags :
Adjustable Fire Hydrant Wrench Tool Adjustable Fire Hydrant Spanner Fire Hydrant Wrench Company carbon steel fire hydrant wrench high quality f wrench for fire hydrant valve
read more
Fire Hydrant Water Splitter Wye Fire Hose Ball Valve
Fire Hydrant Water Splitter Wye Fire Hose Ball Valve 1. Product introduction Our ball valve wyes are designed to divide one stream of water into two, similar to our plain wyes. They’re also equipped with a female swivel inlet and two rigid male outlets. However, the ball valve wye’s ¼ turn handles give the user the ability to shut off water to either outlet. 2. Product Parameter Item No. Inlet Outlet FHS2515 2½” F Swivel NH 2X1.5” M NH FHS2515 - 2 2½” F Swivel NST 2x1.5” M NST 3. Products Features a.Material: Aluminum alloy b.Inlet and outlet connection to threaded couplings c.Red paint finish outside. d.Special connection inlet and outlet available upon request

Related Tags :
Hydrant Wye Valve Water Splitter Wye
read more
5 Groove Victaulic Type 12 Inch LDH Coupling for Industrial Layflat Hose

Related Tags :
12 Inch LDH Coupling 12 Inch Coupling Groove Victaulic Coupling Coupling for Industrial 5 Groove LDH Coupling V Groove Coupling
read more

first page
<< 1 2 3 4 5 6 >>
last page

A total of

pages